JMAXX-110A 10-inch, Professional 2-way Active Speaker - 10" + 1" - 700Wrms+200Wrms The JMaxX 110A features a 10" LF woofer with 2" voice coil 1 exit throat HF compression driver with 1 voice coil 700W RMS LF, 200W RMS HF DSP with 4-EQ pre-sets all in an incredibly lightweight gas injected molded polypropylene cabinet. 129.5 dB SPL. 10 " LF woofer and a 1’’ exit throat HF compression driver with 1.4” voice coil 700W RMS Low Frequency AND 200W RMS for High Frequency, Class D power amplifiers with switch mode power supply DSP with 4-EQ presets Control panel with XLR IN and XLR LINK, Volume, EQ presets, HP filter, GND LFT switch 2 x M10 suspension points, 35mm (1.3/8”) top-hat speaker stand socket, wall bracket mount flange plate 90°H x 60°V constant directivity horn Stage monitor angling facility with 12°, 40°, or 55° taper MORE»
| List | $1,100.00 |
JMAXX-112A 12-inch, Professional 2-way Active Speaker. The JMaxX 112A features a 12" LF woofer with 2" voice coil 1" exit throat HF compression driver with 1" voice coil 700W RMS LF, 200W RMS HF DSP with 4-EQ pre-sets all in an incredibly lightweight gas injected molded polypropylene cabinet. 131 dB SPL. 12 Inch Low Frequency Woofer and a 1" High frequency Compression driver 2-way, bi-amplified bass reflex design cabinet 700W RMS LF, 200W RMS HF, Class D power amplifiers with switch mode power supply DSP with 4-EQ presets Control panel with: XLR IN and XLR LINK, Volume, EQ presets, HP filter, GND LFT switch 2 x M10 suspension points, 35mm (1.3/8”) top-hat speaker stand socket, wall bracket mount flange plate 90° Horizontal x 60° Vertical constant directivity horn Stage monitor angling facility with 12°, 40° or 55° taper Just 13.8 Kg MORE»
| List | $1,235.00 |
JMAXX-114A 14-inch, Professional 2-way Active Speaker The JMaxX 114A features a 14" LF woofer with 2" voice coil 1" exit throat HF compression driver with 1.4" voice coil 700W RMS LF, 200W RMS HF DSP with 4-EQ pre-sets all in an incredibly lightweight gas injected molded polypropylene cabinet. 132 dB SPL. 30.86 lbs MORE»
| List | $1,140.00 |
PROMAXX114A Active 2-way composite enclosure with 14" & 1.4" 700w (class D) & 200w (AB) The ProMax114a is an active speaker equipped with a 14' custom FBT speaker complete with a 1.4" B&Cs compression driver 900w RMS HF - 90°H x 60°V dispersion - Designed, Engineered, and Manufactured in Italy. 2-way, bi-amplified, bass-reflex design cabinet Biamped: 700W RMS LF, 200W RMS HF, power amplifiers in Class D for LF and in Class H/AB for HF with switch-mode power supplies Digital signal processor with graphic display Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push 2 x M10 suspension points, 35 mm (1,3/8”) top-hat speaker stand socket, wall bracket mount flange plate 90°H x 60°V constant directivity horn Front of House or Stage Floor Monitor: with 12°, 40° and 55° monitoring angles 3550mm (14") LF woofer with 64mm (2.5") voice coil, custom made for FBT 35mm (1.4") throat exit B&C HF magnet compression driver with 34mm (1.4”) voice coil Frequency response from 45Hz to 20KHz Sturdy, gas-injected polypropylene molded enclosures, engineered to contain undesired resonance Extremely light only 17.4kg Compact Dimensions: ProMaxX 114A uses the same size gas-injected polypropylene molded enclosure as the ProMaxX 112A, but features our 14” LF Woofer for lower frequency SPL. MORE»
| List | $2,060.00 |
The StageMaxX 12 MA is a Processed Active Reinforcement Stage Monitor. Featuring a 400W + 100W RMS amp module delivering 130dB SPL. Inside we have a Coaxial custom FBT 12” B&C speakers with 64mm (2.5”) voice coil with a B&C 25mm (1”) exit throat compression driver and 44mm (1.7”) voice coil, outside we have a Sturdy gas-injected polypropylene molded enclosure to avoid undesired resonance. All are proudly made in Italy. Black finish. The 4 presets are: ORIGINAL: is the typical “MaxX” sound adapted to the “STAGE” application HI-CUT / DRUM FILL: provides less mid-high for comfortable listening in near-field at a high level LO-CUT / DOUBLE: provides less low frequency for better intelligibility and for optimal coupling in a stereo configuration FOH: Front Of House use in suspended or pole-mount installations. FBT’s new StageMaxX 12Ma has been inspired by the need to have a product specifically designed and engineered for use as a stage monitor, overcoming all these compromises for full user satisfaction. Low profile and aesthetic elegance Compact size Frequency response studied for stage monitor applications High headroom before feedback High sound quality Great power and dynamics Symmetric dispersion Aligned LF and HF acoustic centers Easy handling on stage Lightweight Heavy-duty polypropylene cabinet MORE»
| List | $2,060.00 |
The StageMaxX 12 MA is a Processed Active Reinforcement Stage Monitor. Featuring a 400W + 100W RMS amp module delivering 130dB SPL. Inside we have a Coaxial custom FBT 12” B&C speakers with 64mm (2.5”) voice coil with a B&C 25mm (1”) exit throat compression driver and 44mm (1.7”) voice coil, outside we have a Sturdy gas-injected polypropylene molded enclosure to avoid undesired resonance. All are proudly made in Italy. White finish. The 4 presets are: ORIGINAL: is the typical “MaxX” sound adapted to the “STAGE” application HI-CUT / DRUM FILL: provides less mid-high for comfortable listening in near-field at a high level LO-CUT / DOUBLE: provides less low frequency for better intelligibility and for optimal coupling in a stereo configuration FOH: Front Of House use in suspended or pole-mount installations. FBT’s new StageMaxX 12Ma has been inspired by the need to have a product specifically designed and engineered for use as a stage monitor, overcoming all these compromises for full user satisfaction. Low profile and aesthetic elegance Compact size Frequency response studied for stage monitor applications High headroom before feedback High sound quality Great power and dynamics Symmetric dispersion Aligned LF and HF acoustic centers Easy handling on stage Lightweight Heavy-duty polypropylene cabinet MORE»
| List | $2,060.00 |
VENTIS-110 2-way Passive speaker - 10" + 1" - 300Wrms. Ventis 110 is part of the Ventis range which is ideal for portable performance or fixed installation. This passive speaker Features a 10" woofer and a 1" exit 1.4"VC compression driver. Recommended amplifier of 300 W at 8 Ohm will deliver 127dB SPL connections via 2 x Speakon NL4 In + Thru. All are housed in a 15mm Baltic birch ply cabinet with a 35mm pole mount and a full-length grille. optional brackets for installation are available. MORE»
| List | $1,340.00 |
VENTIS-110A 10" 2-way Active speaker - 10" + 1" 700w + 200w w/DSP and Delay. Ventis 110A is part of the Ventis range which is ideal for portable performance or fixed installation. This Active speaker includes a 10" woofer and a 1" exit 1.4"VC compression driver.The built-in DSP LCD screened Amp module is 700W + 200W Delivering 131dB SPL. Features a 15mm Baltic birch ply cabinet with a 35mm pole mount and a full-length grille. optional brackets for installation are available. The FBT VENTIS range offers powerful DSP with 6 versatile presets. Crafted by expert FBT engineers, the presets offer a performance for every requirement. ORIGINAL / LIVE The renowned, smooth FBT sound VOCAL A special EQ setting to maximize speech intelligibility DJ is Designed to keep the energy high and your audience dancing TOURING The reliability and the roar of the industry’s most popular touring systems LOUDNESS The ultimate preset for listening at a medium or low volume WARM A special setting to emphasize full-bodied, low-mid frequencies 2-way, bi-amplified, bass-reflex design Bi-amped: 700W RMS LF and 200W RMS HF power amplifiers in Class D for LF and in Class H/AB for HF Digital Signal Processor with graphic display 15 mm (0.59") birch plywood scratch resistant enclosure and internal bracing High-efficiency switch mode power supply Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push 250mm (10") LF woofer with 50mm (2") voice coil, custom made for FBT 25mm (1") exit throat B&C HF compression driver with 36mm (1.4") voice coil Frequency response from 58Hz to 20 kHz 80°H x 50°V Constant Directivity Rotatable Horn 6 x M10 suspension points, optional wall bracket mount thread, 35mm (1 3/8") top-hat Speaker stand socket, one aluminum handle 45° monitor taper Adjustable delay between 0 - 10m Weight: 15.6Kg Dimensions : 329 x 575 x 325mm MORE»
| List | $2,060.00 |
VENTIS-112 2-way Passive speaker - 12" + 1" - 400Wrms. Ventis 112 is part of the Ventis range which is ideal for portable performance or fixed installation. This passive speaker Features a 12" woofer and a 1" exit 1.4" compression driver. The recommended amplifier of 400 W at 8 Ohm will deliver 129 dB SPL connections via 2x Speakon NL4 In + Thru. All are housed in a 15mm Baltic birch ply cabinet with a 35mm pole mount and a full-length grille. optional brackets for installation are available. MORE»
| List | $1,650.00 |
VENTIS-112A 12" 2-Way Active speaker 12" + 1" 700w + 200w w/DSP and Delay. Ventis 112A is part of the Ventis range which is ideal for portable performance or fixed installation. This Active speaker includes a 12" woofer and a 1" exit 1.4"VC compression driver.The built-in DSP LCD screened Amp module is 700W + 200W Delivering 133dB SPL. Features a 15mm Baltic birch ply cabinet with a 35mm pole mount and a full-length grille. optional brackets for installation are available. The FBT VENTIS range offers powerful DSP with 6 versatile presets. Crafted by expert FBT engineers, the presets offer a performance for every requirement. ORIGINAL / LIVE The renowned, smooth FBT sound VOCAL A special EQ setting to maximize speech intelligibility DJ is Designed to keep the energy high and your audience dancing TOURING The reliability and the roar of the industry’s most popular touring systems LOUDNESS The ultimate preset for listening at a medium or low volume WARM A special setting to emphasize full-bodied, low-mid frequencies. 2-way, bi-amplified, bass-reflex design Bi-amped: 700W RMS LF and 200W RMS HF power amplifiers in Class D for LF and in Class H/AB for HF Digital Signal Processor with graphic display 15 mm (0.59") birch plywood scratch resistant enclosure and internal bracing High-efficiency switch mode power supply Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push 320mm (12") LF woofer with 64mm (2.5") voice coil, custom made for FBT 25mm (1") exit throat B&C HF compression driver with 36mm (1.4") voice coil Frequency response from 48Hz to 20 kHz 80°H x 50°V Constant Directivity Rotatable Horn 6 x M10 suspension points, optional wall bracket mount thread, 35mm (1 3/8") top-hat Speaker stand socket, two aluminum handles 45° monitor taper Adjustable delay between 0 - 10m Weight: 20.6Kg Dimensions : 387 x 665 x 380mm MORE»
| List | $2,320.00 |
VENTIS-112-M 2-way Passive monitor - 12" + 1" - 500Wrms The Ventis 112M is a dedicated floor monitor for use on small to medium-sized stages This passive speaker features a 12" coaxial custom woofer with a 2,5" voice coil and 1" exit throat B&C with a 1,7" voice coil. The rear panel provides two NL4 Neutrik Speakon connectors. Recommended amplifier 500W/8ohm will deliver 129dB SPL. Optional brackets for installation are available. MORE»
| List | $1,700.00 |
VENTIS-112MA 2-way Active - 12" (1") Coaxial Stage Monitor w/DSP - 700Wrms (class D)+200Wrms (Class AB) The Ventis 112MA is a dedicated floor monitor for use on small to medium-sized stages. This Active speaker features a 12" coaxial custom woofer with a 2,5" voice coil and a 1" exit throat B&C with a 1,7" voice coil. The built-in amp module features 700W + 200W Delivering 129dB SPL. optional brackets for installation are available. Rated at 700W + 200W, the bi-amplified 112MA delivers 132dB SPL in a bass-reflex design, using a 320mm (12”) coaxial custom woofer with a 64mm (2.5’’) voice coil, 25mm (1”) B&C throat and 44mm (1.7”) voice coil. The enclosure has a frequency response of 55Hz to 20kHz with 90° conical dispersion, while onboard DSP offers six factory presets for a broad range of scenarios. For flexibility in use, the monitor offers a 35mm (1.38’’) stand socket, two integrated carrying handles, and an optional wall mount bracket. MORE»
| List | $2,370.00 |
VENTIS-115 2-way Passive speaker - 15" + 1" - 500Wrms. The Ventis 115 is part of the Ventis range which is ideal for portable performance or fixed installation. This passive speaker features a 15 " woofer and a 1.7" compression driver. The recommended amplifier of 400 W (RMS) at 8 Ohm will deliver 129 dB SPL Connections via 2x Speakon NL4 In + Thru. All are housed in a 15mm Baltic birch ply cabinet with a 35mm pole mount and a full-length grille. Optional brackets for installation are available. MORE»
| List | $1,855.00 |
VENTIS-115-M 2-way Passive monitor - 15" + 1" - 500Wrms The Ventis 115M is a dedicated floor monitor for use on small to medium-sized stages This passive speaker features a 15" coaxial custom woofer with a 2,5" voice coil and a 1" exit throat B&C with a 1,7" voice coil. The rear panel provides two NL4 Neutrik Speakon connectors. Recommended amplifier 500W/8ohm will deliver 130dB SPL. optional brackets for installation are available. MORE»
| List | $1,955.00 |
VENTIS-115MA 2-way Active - 15" (1") Coaxial Stage Monitor w/DSP - 700Wrms (class D)+200Wrms (Class AB) The Ventis 115MA is a dedicated floor monitor for use on small to medium-sized stages. Rated at 700W + 200W, the bi-amplified 115MA delivers 132dB SPL in a bass-reflex design, using a 320mm (12) coaxial custom woofer with a 64mm (2.5) voice coil, 25mm (1) B&C throat, and 44mm (1.7) voice coil. MORE»
| List | $2,575.00 |
JBL 104-BT compact reference monitors with Bluetooth, the newest models in the 1 Series line, draw from seven decades of JBL Professional engineering to deliver the truest, most accurate sound in their class. They're perfect for recording musicians, producers, podcasters and vloggers, as well as professional audio engineers seeking an accurate portable reference with Bluetooth streaming. JBL 104-BT Reference Monitors combine a powerful coaxial 4.5-inch (118 mm) low-frequency driver and .75-inch (19 mm) soft-dome tweeter, potent integrated 60-watt amplification and an innovative acoustic design to reproduce honest sound with exceptional imaging and crisp detail. Bluetooth streaming lets you check mixes over Bluetooth to make sure they sound great in every listening scenario. Both the black 104-BT and white 104-BTW versions are sleek, elegant designs and compact form factors, making stunning statements in any studio while conserving valuable work space. Creative professionals, music lovers and anyone who wants the flexibility to stream both wired and wireless sound into high-quality studio monitors can count on JBL 104-BT to provide an accurate, reliable sonic reference and a truly enjoyable listening experience. MORE»
| List | $262.23 |
The JBL EON712 12-inch loudspeaker is part of JBL's new EON700 Series of powered PAs, which represents a major step forward in innovation and technology by delivering truly intelligible, clearly consistent coverage at any volume level. The EON700 Series leverages the latest acoustic science, transducer designs, cabinet materials, and advanced DSP and control technologies to deliver extraordinary performance in a fully professional, highly flexible, easy-to-use, portable system. With four models available, including the 10-inch EON710, the 12-inch EON712, and the 15-inch EON715 powered PA speakers and the 18-inch EON718S subwoofer, EON700 systems cover the needs of today's working musicians and sound providers. MORE»
| List | $823.00 |
Kustom's KPM4 50W powered wedge monitor combines quality performance and convenient features, all in a highly portable package. You'll find that the KPM4 works well in a variety of environments, amplifying vocals, instruments, keyboards, drum machines, audio devices and more.
Features include a 50W power amp, one 4-1/2" speaker, a piezo driver, XLR and 1/4" inputs, a grille cover and a rugged carry handle. Its wedge shape makes it ideal for use as a stage monitor. A thru jack allows you to daisy-chain multiple monitors together, and an onboard volume control lets you achieve maximum volume without feedback.
| List | $149.99 |
The Kustom KPX210A powered wedge monitor combines quality performance and convenient features all in a highly portable package. You'll find that the KPX210A works well in a variety of environments—amplifying any line level signal from mixers, instruments, keyboards, drum machines, audio devices and more. Features include a 100W power amp, two 10" speakers, a piezo horn driver, XLR and 1/4" inputs, a grille cover and a rugged carry handle. Its wedge shape makes it ideal for use as a stage monitor. A thru jack allows you to daisy-chain multiple monitors together, and an onboard volume control lets you achieve maximum volume without feedback.
| List | $249.99 |
Compact Monitor System 150 watt Class D amplification Ultra-low noise 3 channel mixer 2 mic/line channels + 1 line channel 3 band EQ Built-in effects Mic stand mounting system MORE»
| List | $349.00 |
150 watt PORTABLE PA with MP3 Player 150 watt Class D amplification MP3 media player with USB Bluetooth connectivity Ultra-low noise 3-channel mixer 2 mic/line channels + 1 line channel 3 band EQ Built-in effects Mic stand mounting system MORE»
| List | $419.00 |
Coaxial HF and LF units for increased sensitivity and true production of tone with reduced distortion NdFeB magnetic HF compression drivers with 44mm voice coil for bright and penetrating tone Dual Class D amplification circuits with 24bit 48kHz DSP modules on active models, with 3 band EQ 2 XLR/Jack inputs with individual levels, Aux input, Main mix and link thru outputs 43 degree monitoring angle and 35mm speaker pole mounting socket, for use as a monitor speaker or live PA cabinet Available in highly durable paint or hard-wearing carpet finishes with robust steel grille Ultra-compact footprint, lightweight design 12'' PASSIVE MONITOR (PAINT) MORE»
| List | $649.00 |
Coaxial HF and LF units for increased sensitivity and true production of tone with reduced distortion NdFeB magnetic HF compression drivers with 44mm voice coil for bright and penetrating tone Dual Class D amplification circuits with 24bit 48kHz DSP modules on active models, with 3 band EQ 2 XLR/Jack inputs with individual levels, Aux input, Main mix, and link thru outputs 43 degree monitoring angle and 35mm speaker pole mounting socket, for use as a monitor speaker or live PA cabinet Available in highly durable paint or hard-wearing carpet finishes with robust steel grille Ultra-compact footprint, lightweight design 12'' ACTIVE MONITOR (PAINT) MORE»
| List | $815.00 |
Coaxial HF and LF units for increased sensitivity and true production of tone with reduced distortion NdFeB magnetic HF compression drivers with 44mm voice coil for bright and penetrating tone Dual Class D amplification circuits with 24bit 48kHz DSP modules on active models, with 3 band EQ 2 XLR/Jack inputs with individual levels, Aux input, Main mix and link thru outputs 43 degree monitoring angle and 35mm speaker pole mounting socket, for use as a monitor speaker or live PA cabinet Available in highly durable paint or hard-wearing carpet finishes with robust steel grille Ultra-compact footprint, lightweight design. 15'' PASSIVE MONITOR (PAINT) MORE»
| List | $789.00 |
Coaxial HF and LF units for increased sensitivity and true production of tone with reduced distortion NdFeB magnetic HF compression drivers with 44mm voice coil for bright and penetrating tone Dual Class D amplification circuits with 24bit 48kHz DSP modules on active models, with 3 band EQ 2 XLR/Jack inputs with individual levels, Aux input, Main mix, and link thru outputs 43 degree monitoring angle and 35mm speaker pole mounting socket, for use as a monitor speaker or live PA cabinet Available in highly durable paint or hard-wearing carpet finishes with robust steel grille Ultra-compact footprint, lightweight design 15'' ACTIVE MONITOR (PAINT) MORE»
| List | $895.00 |
