Double-Brace, Low Profile Stand for Large Amps and Combos MORE»
List | $193.33 |
BS/402 Near-field Monitor Stand Height adjustable near-field monitor stand. Perfect for home, project or professional recording studios. All-steel, arc welded construction: no fibre or chipboard. Sturdy metal top plate provides steady and safe support. Attractive QuikLok patented design incorporating cable management. Available in scratch-resistant, baked-on, non reflective, black enamel finish. MORE»
List | $168.33 |
This heavy duty, fully adjustable A-frame stand features a dual set of robust, height-adjustable, foldable support arms that ensure maximum versatility of use and allow for a variety of applications. The BS625 can be configured to securely hold various sized combo amplifiers, up to two 12'' speaker cabinets and cabinet/amp head combinations. The tilt-back bottom amp holders are height adjustable to 4 positions, and can safely accommodate large size combo amps or speaker cabinets with up to 2 x 12'' speakers. The top amp platform, featuring 6 height posit ions with safety locking pin and tilt adjustability, will securely hold combo amplifiers and amp heads. When positioned horizontally and with folded support arms, the top platform can also become a very suitable accommodation for guitar effects, rack cases or small mixers, leaving enough room for up to a 27.5'' (70 cm) high combo amplifier to be placed on the bottom support arms. Tilt-back design and height adjust ability allow for ideal amp positioning from floor, optimal sound and fine quality listening. Soft, rubber rest pads hold amps firmly in place. Adjustable leveling feet compensate for uneven floors. Folds completely flat for easy portability and storage. MORE»
List | $331.67 |
Designed to hold up to 4 acoustic or 6 electric/bass guitars or a combination of electric and acoustic instruments. Solidly constructed with high-grade steel to ensure a stable base for supporting up to 6 of the heaviest guitars firmly in place. Padded backrest and base are covered with special foam cushioning that provides a soft but safe support for the guitars and protects them from damages. Easily adjustable, foam rubber partition disks located on backrest and base protect guitars from damages One-piece design for easy and rapid setup in perfect open position without need for tools. Collapsible backrest allows to quickly fold the stand down to a compact, lightweight, space-saving size for easy storage and convenient portability. Ideal for use on stage, in studios or at home, but also great for store displays and trade shows. MORE»
List | $235.83 |
Quik Lok GS-402 Small Rotating Guitar Wall Hanger MORE»
List | $38.33 |
Guitar Wall Hanger with raised front forks. Designed to lift guitar over front fork. Screws into wall MORE»
List | $38.33 |
Multiple universal guitar stand for three guitars. Ideal for use on stage or studios, but also great for store displays, and trade shows. Lower cradles designed to hold either acoustic or electric guitars firmly in place and soft rubberized cushioning protects guitars from scratches and will not mar finish. Rear locking pin allows to quickly set the stand in perfect open position and fold it down to a convenient portable size for transport without need for tools. Equipped with casters for easy mobility. MORE»
List | $260.00 |
The most popular guitar stands ever made, now redesigned for a new contemporary and modern look. Quik Lok A-frame stands are solidly constructed with high-grade steel and arc-welded joints, in a true integration with high-tech style. Soft rubberized cushioning on cradles holds guitar firmly in place without damaging finish. The gentle press of the spring-loaded lever located in the back of the upper disc allows to quickly set the stand in perfect open position and fold it flat for easy storage. Firmly locks in open position. MORE»
List | $65.00 |
The most popular guitar stands ever made, now redesigned for a new contemporary and modern look. Quik Lok A-frame stands are solidly constructed with high-grade steel and arc-welded joints, in a true integration with high-tech style. Soft rubberized cushioning on cradles holds guitar firmly in place without damaging finish. The gentle press of the spring-loaded lever located in the back of the upper disc allows to quickly set the stand in perfect open position and fold it flat for easy storage. Firmly locks in open position. MORE»
List | $65.00 |
The most popular guitar stands ever made, now redesigned for a new contemporary and modern look. Quik Lok A-frame stands are solidly constructed with high-grade steel and arc-welded joints, in a true integration with high-tech style. Soft rubberized cushioning on cradles holds guitar firmly in place without damaging finish. The gentle press of the spring-loaded lever located in the back of the upper disc allows to quickly set the stand in perfect open position and fold it flat for easy storage. Firmly locks in open position. MORE»
List | $61.67 |
Multiple universal guitar stand for five guitars. Ideal for use on stage or studios, but also great for store displays, and trade shows. Lower cradles designed to hold either acoustic or electric guitars firmly in place and soft rubberized cushioning protects guitars from scratches and will not mar finish. Rear locking pin allows to quickly set the stand in perfect open position and fold it down to a convenient portable size for transport without need for tools. Equipped with casters for easy mobility. MORE»
List | $335.00 |
Multiple universal guitar stand for seven guitars. Ideal for use on stage or studios, but also great for store displays, and trade shows. Lower cradles designed to hold either acoustic or electric guitars firmly in place and soft rubberized cushioning protects guitars from scratches and will not mar finish. Rear locking pin allows to quickly set the stand in perfect open position and fold it down to a convenient portable size for transport without need for tools. Equipped with casters for easy mobility. MORE»
List | $421.67 |
Clever, safe and practical design allows musicians to integrate their iPad 2 or ne w iPad (third generation) with existing microphone and sheet music stands, for use on stage, production studios, in the rehearsal room or at home. Flexible yet rugged rubberized plastic clips will hold the t ablet firmly and secur ely in place, without interfering with dock connector, speaker, headphone jack, on/o ff and volume buttons. Snapping the iPad into the holder and sliding it out is effortless and quick! No-wobble aluminium plate is designed to ensure full tilt and rotational adjustability, and to switch rapidly from the vertical to the horizontal viewing mode without slipping, for ideal positioning of your iPad. The holder can be fastened directly on to any 3/8'' standard microphone stand thread connection. A slim yet sturdy steel bracket (included) allows to mount the tablet holder sideways to the vertical pole of any microphone or sheet music stand with diameter ranging from 14 to 30 mm (0.55'' t o 11.8''). MORE»
List | $69.98 |
Clever, safe and practical design allows musicians to integrate their iPad 2 or new iPad (third generation) with existing keyboard stands, for use on stage, production studios, in the rehearsal room or at home. Flexible yet rugged rubberized plastic clips will hold the tablet firmly and securely in place, withoutint erfering with dock connector, speaker, headphone jack, on/off and volume buttons. Snapping the iPad into the holder and sliding it out is effortless and quick! No-wobble aluminium plate is designed to ensure full tilt and rotational adjust ability, and to switch rapidly from the vertical to the horizontal viewing mode without slipping, for ideal positioning of your iPad. MORE»
List | $114.99 |
Fully Adjustable Studio Utility Stand for Mixers and other Equipment from 14.4" to 21" (36.5 - 53.5 cm ) Wide, Perfect stand for securely holding studio remote units, digital or analog multi-track recorders, mid data input devices and small mixers up to 26" (66cm) deep. Ideally suited for home, project, multimedia and professional recording studios. Width, depth and tilt adjustable steel platform with padded cushions holds equipment firmly and safely in place. Five wheel, easy roll, injection-molded plastic base with locking casters. Locking height adjustability allows the user to be sitting or standing. MORE»
List | $435.00 |
Professional heavy duty, double-brace "X" stand with height /tilt adjustable second and third tier. The "Pro Series" stands are capable of holding the heaviest keyboards safely and securely. All stands feature The Original locking disc system and super heavy duty 30 mm x 30 mm steel tube bracing for extra sturdiness and structural support. MORE»
List | $462.50 |
The most popular guitar stands ever made, now redesigned for a new contemporary and modern look. Quik Lok A-frame stands are solidly constructed with high-grade steel and arc-welded joints, in a true integration with high-tech style. Soft rubberized cushioning on cradles holds guitar firmly in place without damaging finish. The gentle press of the spring-loaded lever located in the back of the upper disc allows to quickly set the stand in perfect open position and fold it flat for easy storage. Firmly locks in open position. QL/631 is a low frame electric guitar stand. MORE»
List | $96.67 |
The most popular guitar stands ever made, now redesigned for a new contemporary and modern look. Quik Lok A-frame stands are solidly constructed with high-grade steel and arc-welded joints, in a true integration with high-tech style. Soft rubberized cushioning on cradles holds guitar firmly in place without damaging finish. Firmly locks in open position and folds flat for easy transport, by the gentle press of the spring-loaded lever located in the back of the upper disc. QL/633 is a low “A" frame acoustic guitar stand. MORE»
List | $114.17 |
Heavy Duty, Double-Brace "X" with Height & Tilt Adjustable Second Tier MORE»
List | $380.00 |
Double-brace and single-tier Keyboard "X" stand, with "The Original" locking disc system. MORE»
List | $188.33 |
Foldable, universal acoustic / electric guitar stand with height adjustable neck holder. Soft, rubberized cushioning protects guitars from scratches and will not mar finish. MORE»
List | $96.67 |
Foldable, universal acoustic / electric guitar stand with height adjustable neck holder. Soft, rubberized cushioning protects guitars from scratches and will not mar finish. MORE»
List | $274.17 |
Patented design easily allows the QL/791 to conform to the contour of any electric guitar or bass. - Each lower guitar cradle independently adjusts, in both height and angle, out of the way of knobs, switches or input jacks. - Solidly constructed with high-grade steel and arc-welded joints for years of dependability. - Soft, rubberized cushioning protects guitars from scratches and will not mar finish. - Cushioned protector on height adjustable neck holder prevents the guitar from falling out of stand. - Rear adjustment knob firmly locks stand in any open position up to 15 (38 cm) wide and at the same time sets neck holder at the desired height. - Rotating leveling foot compensates for uneven floors. - Folds down to a convenient portable size for transport and easy storage. MORE»
List | $110.83 |
Extremely strong steel construction and rugged design allow the heaviest of speakers to safely hang on the wall, up to 20 kg (44.4 lb). Heavy duty 6-hole wall plate ensures secure wall connection, while its clean-cut lines are an elegant presence in any kind of environment. Features 180° horizontal and 40° tilt adjustability for ideal speaker positioning. Incorporates a universal, versatile speaker plate designed with 10 holes and 2 slots that make it a suitable fit for most popular speakers on the market. Available with scratch-resistant, baked-on, non-reflective, black enamel finish. MORE»
List | $275.83 |