215 Items Found
FBT
JMAXX-110A 10-inch, Professional 2-way Active Speaker
Model: JMAXX110A

JMAXX-110A 10-inch, Professional 2-way Active Speaker - 10" + 1" - 700Wrms+200Wrms The JMaxX 110A features a 10" LF woofer with 2" voice coil 1 exit throat HF compression driver with 1 voice coil 700W RMS LF, 200W RMS HF DSP with 4-EQ pre-sets all in an incredibly lightweight gas injected molded polypropylene cabinet. 129.5 dB SPL. 10 " LF woofer and a 1’’ exit throat HF compression driver with 1.4” voice coil 700W RMS Low Frequency AND 200W RMS for High Frequency, Class D power amplifiers with switch mode power supply DSP with 4-EQ presets Control panel with XLR IN and XLR LINK, Volume, EQ presets, HP filter, GND LFT switch 2 x M10 suspension points, 35mm (1.3/8”) top-hat speaker stand socket, wall bracket mount flange plate 90°H x 60°V constant directivity horn Stage monitor angling facility with 12°, 40°, or 55° taper MORE»

List $1,100.00

Compare

FBT
JMAXX-112A 12-inch, Professional 2-way Active Speaker
Model: JMAXX112A

JMAXX-112A 12-inch, Professional 2-way Active Speaker. The JMaxX 112A features a 12" LF woofer with 2" voice coil 1" exit throat HF compression driver with 1" voice coil 700W RMS LF, 200W RMS HF DSP with 4-EQ pre-sets all in an incredibly lightweight gas injected molded polypropylene cabinet. 131 dB SPL. 12 Inch Low Frequency Woofer and a 1" High frequency Compression driver 2-way, bi-amplified bass reflex design cabinet 700W RMS LF, 200W RMS HF, Class D power amplifiers with switch mode power supply DSP with 4-EQ presets Control panel with: XLR IN and XLR LINK, Volume, EQ presets, HP filter, GND LFT switch 2 x M10 suspension points, 35mm (1.3/8”) top-hat speaker stand socket, wall bracket mount flange plate 90° Horizontal x 60° Vertical constant directivity horn Stage monitor angling facility with 12°, 40° or 55° taper Just 13.8 Kg MORE»

List $1,235.00

Compare

FBT
JMAXX-114A 14-inch, Professional 2-way Active Speaker
Model: JMAXX114A

JMAXX-114A 14-inch, Professional 2-way Active Speaker The JMaxX 114A features a 14" LF woofer with 2" voice coil 1" exit throat HF compression driver with 1.4" voice coil 700W RMS LF, 200W RMS HF DSP with 4-EQ pre-sets all in an incredibly lightweight gas injected molded polypropylene cabinet. 132 dB SPL. 30.86 lbs MORE»

List $1,140.00

Compare

FBT
joining bracket for 2 CLA406.2a
Model: VTJ406.2

joining bracket for 2 CLA406.2a Joint Bar for CLA 406.2A + CLA 406.2A/CLA206A MORE»

List $360.50

Compare

FBT
KW-HM80/100 Wheel kit for Subline 115
Model: KWHM80/100

Wheel kit for Subline 115 4 Wheels (2 braked) Set of 4 80mm casters Compatible with: SubLine 115SA - HiMaxX 100SA - ProMaxX 15SA 2 Wheels have brakes MORE»

List $206.00

Compare

FBT
Locking casters (4) for MITUS 218, 118, 121, SUBLINE 18
Model: KBW1004S

Locking casters (4) for MITUS 218, 118, 121, SUBLINE 18 MORE»

List $245.00

Compare

FBT
MITUS-118FSA Flyable Compact 18" Subwoofer
Model: MITUS118FSA

MITUS-118FSA Flyable Compact 18" Subwoofer, can be hung forwards or rearwards - 1200Wrms The MITUS 118FSA is a cardioid arrayable and flyable subwoofer. It is designed and manufactured by FBT's renowned engineers and artisans, the Mitus 118FSA is a prime example of audio perfection with ergonomic innovations. The Mitus 118FSA is a hybrid loaded 18" neodymium subwoofer designed to suspend from a MT-F 212 flybar either facing forward (FSA model) or rearward (FSCA model). Compact hybrid bandpass cardioid-arrayable subwoofer. Hybrid configuration permits to obtain extension and speed of vented with high SPL and acoustic filtering of bandpass Suspension hardware is fully compatible with MITUS206La allowing the enclosure to be suspended front (FSA model) or rear-firing (FSCA model) for easy cardioid configurations Large area laminar-flow port to ensure no power compression and very low port turbulence For cardioid configurations with one SUB-rear-firing and two sub-front-firing, more than 15dB SPL rejection can be obtained behind the array 18" (460mm) custom B&C neodymium magnet high excursion woofer with a 3.5" (88mm) voice coil Frequency Response from 33Hz to 1Hz Class D amplifier delivering 1200WRMS Switch-mode power supply DSP with 8 presets, cardioid and with infra configurations, delay Control panel with XLR input and link, volume, presets, delay, phase 0°-180°, ground-lift 5/8" (15mm) birch plywood enclosure, scratch-resistant black paint Low-frequency extension cabinet for the MITUS 206LA line array for flying or ground-stacked configurations Very low profile for an 18" size woofer MORE»

List $4,945.00

Compare

FBT
MITUS-206-L Passive Line Array - 2x6,5" + 1,4" - 500Wrms+150Wrms
Model: MITUS206L

Passive Line Array - 2x6,5" + 1,4" - 500Wrms+150Wrms The FBT MITUS 206L is a two-way compact line array system featuring 2 x 6.5” B&C neodymium woofers with a 1.7” voice coil and a 1.4” exit B&C neodymium driver with a 2.5” voice coil. All in a Polypropylene gas-injected enclosure. 500W + 150W - 16ohm 129dB SPL LF / 133dB SPL HF Compact 2-way, bass-reflex design Passive version, recommended amplifier of 500Wrms / 16ohm LF and 150 Wrms / 16ohm HF Internal HF protection Neutrik Speakon NL- 4MDV connectors IN & LINK OUT External digital processor require 2 x 6.5’’ (165 mm) B&C neodymium woofers with 1.7’’ (44 mm) coil 1.4’’ (36 mm) exit B&C neodymium driver with 2.5’’ (64 mm) coil Frequency response from 75Hz to 20KHz 100° horizontal waveguide with very low distortion and near-flat wavefront up to 18Khz High impact polypropylene gas-injected enclosure with integrated rigging hardware adjustable with 0° to 10° angle between cabinets at 2° step Ideal for small to medium-sized applications, from single pole-mounted loudspeakers with 100°H x 10°V coverage to multiple cabinet full sized line arrays, the MITUS 206L may be used also in outdoor applications where the system is not directly exposed to the elements A wide range of hardware accessories for flying and ground-stacked configurations Very lightweight, only 13.5Kg MORE»

List $1,955.00

Compare

FBT
MITUS-206-LA Active line array - 2x6,5" + 1,4" - 600Wrms+300Wrms
Model: MITUS206LA

MITUS-206-LA Active line array - 2x6,5" + 1,4" - 600Wrms+300Wrms The FBT MITUS 206LA is a compact lightweight two-way design incorporating 2 x 6.5” B&C neodymium woofers with a 1.7” voice coil and a 1.4” B&C neodymium driver with a 2.5” voice coil. The modularity of the FBT MITUS 206LA makes it extremely flexible for a wide range of applications, from a small 2 cabinet P.A. system to an elaborate line array system consisting of up to 12 MITUS 206LA cabinets along with multiple FBT MITUS 212FSA subs for large concert events. Frequency response from 68Hz to 20KHz Latest Class D built-in amplifiers, 600Wrms to the LF and 300Wrms to the HF with switch mode power supply DSP on-board with 8 presets, +/- 5db HF level control for accurate amplitude shading Control panel with XLR input and link, volume, presets, HF level, HP-filter, ground-lift 100° horizontal waveguide with very low distortion and near-flat wavefront up to 18Khz High impact polypropylene gas-injected enclosure with integrated rigging hardware adjustable with 0° to 10°angle between cabinets at2° step Ideal for small to medium-sized applications, from single pole-mounted loudspeakers with 100°H x 10°V coverage to multiple cabinet full-sized line array, the MITUS 206LA may be used also in outdoor applications where the system is not directly exposed to the elements A wide range of hardware accessories for flying and ground-stacked configurations MORE»

List $2,470.00

Compare

FBT
MITUS-212-FS Flyable Passive Subwoofer - 2x12" - 1000Wrms
Model: MITUS212FS

MITUS-212-FS Flyable Passive Subwoofer - 2x12" - 1000Wrms The FBT MITUS 212FS is a passive 2 x 12" B&C with a 3" Voice coil compact and flyable subwoofer. When combined together in a ground-stacked or flying array it extends the low frequencies of the MITUS 206L line array system. The FBT MITUS 212FS is a 2 x 12" compact and flyable subwoofer which can extend the low frequencies of the MITUS 206L when combined together in ground-stacked or flying arrays. The modularity of the FBT MITUS 212FS makes it extremely flexible for a wide range of applications, from a small system to an elaborate line array system consisting of up to 12 MITUS 206L cabinets along with multiple FBT MITUS 212FS subs for large concert events. The FBT MITUS 212FS shall meet the following performance criteria: Frequency response of 50Hz to 250Hz,Frequency sensitivity of 99dB, Maximum SPL of 134dB continuous and 138dB peak, Recommended power amplifier 1000W RMS/8 Ohm. The MITUS 212FS feature Baltic birch plywood construction covered in a scratch-resistant black paint with an M20 top-mounted stand adapter. Input connectors shall be parallel wired Neutrik NL4 Speakon. 1000W -138dB SPL MORE»

List $3,090.00

Compare

FBT
MITUS-212-FSA Flyable Active Subwoofer - 2x12" - 1200Wrms
Model: MITUS212FSA

MITUS-212-FSA Processed Flyable Active Subwoofer - 2x12" - 1200Wrms. The FBT MITUS 212FSA is an Active 2 x 12" B&C with a 3" Voice coil compact and a flyable subwoofer that can extend the low frequencies of the MITUS 206L when combined together in ground-stacked or flying arrays. Built-in amplifier Delivering 1200W Β– 138dB SPL It can also be utilized as a flyable "Mid-Sub" extension when paired with the Mitus 206LA active line array, and an additional subwoofer. Compact vented subwoofer sharing the same width and suspension hardware as the MITUS 206L 320 mm (2 x 12’’) B&C neodymium magnet high excursion subwoofers with 75 mm (3’’) voice coils Frequency Response from 50Hz to 120Hz Neutrik Speakon NL- 4MDV connectors IN & LINK OUT External digital processor required 15 mm (5/8’’) birch plywood enclosure, scratch-resistant black paint Low-frequency extension cabinet for the MITUS 206L line array for flying or ground-stacked configurations. M20 top mount stand socket MORE»

List $3,865.00

Compare

FBT
MR-FJ-214 Rigging Accessory for azimuth adjustment of Myra 214L
Model: MRFJ214

MR-FJ-214 Rigging Accessory for azimuth adjustment of Myra 214L MORE»

FBT
MR-T-214 Dolly Transport and Ground Stack Bar for Myra 214L
Model: MRT214

MR-T-214 Dolly Transport and Ground Stack Bar for Myra 214L MORE»

FBT
MR-T-218 Dolly transport and ground stack bar for Myra 218S
Model: MRT218

MR-T-218 Dolly transport and ground stack bar for Myra 218S MORE»

FBT
MS 30BK Adapter for fixing purposes J 5
Model: AJ5

MS 30BK Adapter for fixing purposes J 5 MORE»

List $20.00

Compare

FBT
MS-C210 Rain Cover for MUSE210
Model: MSC210

MS-C210 Rain Cover for MUSE210 MORE»

List $92.70

Compare

FBT
MS-C210X4 slip on cover for 4 MUSE on Trolley
Model: MSC210X4

MS-C210X4 slip on cover for 4 MUSE on Trolley MORE»

List $309.00

Compare

FBT
MS-F210 Flybar for MUSE210
Model: MSF210

MS-F210 Flybar for MUSE210 MORE»

List $2,060.00

Compare

FBT
MS-J210 MUSE Ground Stack kit to use with Subline218
Model: MSJ210

MS-J210 MUSE Metal Ground Stack Bracket kit for use with the FBT Subline218/Mitus218 MORE»

List $113.30

Compare

FBT
MS-T210 Trolley for use with MUSE Speakers
Model: MST210

MS-T210 Trolley for use with MUSE Speakers MORE»

List $669.50

Compare

FBT
MT-B-206 Ground stack base for Mitus 206
Model: MTB206

MT-B-206 Metal Ground stack base for Mitus 206 array or for stacking on 118/121 subs. MORE»

List $824.00

Compare

FBT
MT-C-218 Cover for Mitus 218
Model: MTC218

MT-C-218 Cover for Mitus 218 MORE»

List $360.50

Compare

FBT
MT-CH-218 Cover for Mitus 218 with wheels
Model: MTCH218

MT-CH-218 Cover for Mitus 218 with wheels MORE»

List $360.50

Compare

FBT
MT-F 206 Flybar for MITUS 206
Model: MTF206

MT-F 206 Flybar for MITUS 206 MORE»

List $721.00

Compare

FBT
MT-F-212 Flybar for MITUS 212
Model: MTF212

MT-F-212 Flybar for MITUS 212 MORE»

List $1,236.00

Compare

FBT
MT-J-206 Joint Bar MITUS 212 with 206
Model: MTJ206

MT-J-206 Joint Bar MITUS 212 with 206 MORE»

List $412.00

Compare

FBT
MT-S-206 Bracket to allow pole mount of Mitus 206
Model: MTS206

MT-S-206 Bracket to allow pole mount of Mitus 206 (includes threaded pole). MORE»

List $566.50

Compare

FBT
MUSE-118-FS Cardioid-Arrayable Flyable Passive 1x18" Subwoofer
Model: MUSE118FS

MUSE-118-FS Cardioid-Arrayable Flyable Passive 1x18' Subwoofer - 1200Wrms (front version) 139dB SPL Flyable Passive Subwoofer The passive version recommended an amplifier of 1200Wrms / 8ohm Neutrik Speakon NL- 4MDV connectors IN & LINK OUT External digital processor required Compact Hybrid bandpass cardioid-arrayable subwoofer. The hybrid configuration permits to obtaining extension and speed of vented with high SPL and acoustic filtering of bandpass Suspension hardware is fully compatible with MUSE210L allowing the enclosure to be suspended front or rear-firing for easy cardioid configurations Very large area laminar-flow port to ensure no power compression and very low port turbulence 18’’ (460mm) custom B&C neodymium magnet high excursion woofer with 3’’ (75mm) voice coil Frequency Response from 33Hz @-6dB 5/8’’ (15mm) birch plywood enclosure, scratch-resistant black paint, 4 aluminum handles and heavy-duty metal grille with synthetic protection cloth M20 top mount stand socket Optional 4 swivel-mount 4’’ (100mm) casters Low-frequency extension cabinet for the MUSE210L line array for flying or ground-stacked configurations MORE»

List $4,530.00

Compare

FBT
MUSE-118FSA Flyable compact 18" subwoofer, hung forwards or rewards
Model: MUSE118FSA

MUSE-118FSA Flyable compact 18" subwoofer, hung forwards or rewards - 1200Watts RMS Compact Hybrid bandpass cardioid-arrayable subwoofer. Hybrid configuration permits obtaining extension and speed of vented with high SPL and acoustic filtering of bandpass Suspension hardware is fully compatible with MUSE210La allowing the enclosure to be suspended front or rear-firing for easy cardioid configurations The subwoofer can be suspended facing forward or rearward and user-configurable with the capability of front- or rear- mounting the grille and amp module for aesthetic uniformity in cardioid configuration.7 Very large area laminar-flow port to ensure no power compression and very low port turbulence For cardioid configurations with one SUB-rear-firing and two sub-front-firing, more than 15db SPL rejection can be obtained behind the array 18’’ (460mm) custom B&C neodymium magnet high excursion woofer with 3’’ (75mm) voice coil Frequency Response from 33Hz to 1Hz Class D amplifier delivering 1200WRMS Switch-mode power supply MORE»

List $5,150.00

Compare