These buttons are a direct replacement for KlusonŽ vintage stamped steel tuning machines. Will fit modern or vintage applications. Button shaft hole is molded as a straight slot and can be drilled out to fit varied shaft sizes. MORE»
•Available in 4 finishes.
| List | $4.50 |
This KlusonŽ plated dress washer is sized to fit the KlusonŽ Contemporary Diecast Series tuning machines that require a washer under the hex-head bushing that secures the tuning machine in place. These may also work as a replacement for other tuning machines requiring a washer for the same purpose. Washer thickness is measured from the center edge and thins towards outer edge. MORE»
•Available in 4 finishes.
| List | $1.05 |
Replacement brass bushings for vintage FenderŽ guitars - 8.85mm od, (1/4 in. id). These are direct replacements for original FenderŽ guitars. MORE»
•Available in 3 finishes.
| List | $12.75 |
A replacement for KlusonŽ's Locking Vintage Stamped Steel Series tuning machine screw caps. Great to keep on hand just in case you happen to lose one on stage! MORE»
•Available in 3 finishes.
| List | $6.75 |
This button set is a direct replacement for KlusonŽ Supreme Series mandolin tuning machines. MORE»
•Available in 3 finishes.
| List | $26.50 |
This KlusonŽ replacement button set for Revloution Series tuning machines is available the popular keystone shape common for 3 per side applications, these keystone buttons can also be used for our 6 in line tuning machines. The small oval button shape for 6 in line tuning machines is availbale as well and will also fit in a 3 per side format. Includes mounting screws and a set of 6 buttons. MORE»
•Available in 2 shape/finishes.
| List | $34.80 |
These brass replacement bushings are available in 2 types. 6 mm version for metric 6mm I.D. and 11/32 in. O.D. Kluson tuning machines (1995 - 2006 production) or any tuning machine requiring a vintage peg hole size O.D. with a 6mm string post like many import tuning machine manufacturers use, but with a push in vintage type bushing. 1/4 in. for KlusonŽ tuning machines (2006 to current production) or any tuning machines requiring a vintage peg hole size O.D. of 11/32 in. with a 1/4 in. string post I.D. MORE»
•Available in 1 sizes/finishes.
| List | $9.00 |
These KlusonŽ brass adapter bushings are available in 2 types. 6 mm version for use in converting a modern 10mm drilled headstock to accept vintage KlusonŽ brass tuning machines with the metric 6mm string post diameter used between 1995 and 2006. 1/4 in. version for converting a modern 10mm drilled headstock to accept vintage KlusonŽ stamped steel tuning machines with the original US 1/4 inch string post diameter. Many repair shops use these to convert a vintage instrument back to original peg head specs. MORE»
•Available in 1 sizes/finishes.
| List | $9.12 |
These are the correct adapter bushings for contemporary FenderŽ necks that are bored out to slightly larger modern specs. These work as reducer bushings to enable you to install a vintage KlusonŽ tuning machine on a modern headstock from FenderŽ without having to plug and redrill the pegholes. MORE»
•Available in 3 finishes.
| List | $10.99 |
These KlusonŽ replacement push-in bushings are designed to appear like current GibsonŽ production with the more rounded flange. Same mounting specs as the bushings that accompany the current KlusonŽ production tuning machines so they will easily replace similar bushings with the same spec requirements. MORE»
•Available in 3 finishes.
| List | $10.99 |
These simple stamped brass press-fit bushings were used in many instruments from the early 1920's through to the 1960's by GibsonŽ and other instrument manufacturers. They work great as replacements for originals or if you'd just like to add a vintage touch to your peg head. They fit guitars, ukes and mandolins where 1/4 inch diameter string post I.D. is required. MORE»
•Available in 3 finishes.
| List | $9.00 |
