ARCHON-208S Bass reflex Compact Passive Subwoofer - 2x8" - 600Wrms The Archon 208S provides the solution of bass reinforcement in the sound-installed market with a small compact design twin 8" loaded Italian-made discrete cabinet. Can be wall-mounted using an optional AC-W208 bracket. Stylish architectural cabinet design Acoustically transparent steel grilles with protection cloth High SPL, fast responding dynamics, excellent intelligibility, wideband, extremely low distortion Baltic birch plywood cabinets available in black or white extra texture paint Choice of different RAL paint colors on order Choice of different paint finish: glossy, matt, textured, and more, on order Custom designed low-frequency woofers, made in Italy Custom designed high-frequency compression drivers, made in Italy Rotatable horns for optimal horizontal or vertical sound dispersion angle Selectable bi-amp/full range crossover network Full suspension possibilities through multiple M10 / M5 threaded rigging points and a wide range of mounting hardware Possibility to install line transformers for 100V/70V applications Possibility to order weatherproof versions for outdoor use Possibility to extend low frequencies performance through dedicated and compact subwoofers (Archon 208S, Archon 215S) MORE»
ARCHON-215S Bass reflex Compact Passive Subwoofer - 2x15" - 2000Wrms 4ohm 142dB SPL 2 x 15 (4 VC) custom made high excursion woofer with bass-reflex enclosure 18mm (3/4) birch plywood enclosure Four FBT design aluminum handles 2x Speakon NL-4 connectors MORE»
CLA-118-SA 18" Active Bass reflex subwoofer - 900Wrms 138 dB SPL The Vertus CLA 118SA is specifically designed to work with the 206 and 406 Vertus Column Line Array series. This Active 18 B&C high excursion woofer with a 3 voice coil is driven by the built-in 1200W RMS amplifier delivering 138 dB SPL. This great combination is in a 15mm Baltic birch plywood cabinet completely made in Italy. The CLA 118SA is a subwoofer in birch plywood with an 18" woofer from B&C in a bass reflex port with an extensive laminar airflow, minimizing turbulence and power compression. The Class-D, switching power amplifier module is constructed in die-cast aluminum with natural convection and is rated at 1200W. Onboard DSP also offers functions such as filtering, equalization, and protection. When you need to extend the performance of the CLA406A, especially in live applications, the CLA118SA acts as a support and base for the CLA406A column that can be applied, via optional hardware, with M20 points positioned on the top of the sub. The CLA118Sa is also modular and can be stacked thanks to special milling, increasing the SPL and raising the base of CLA406A. 18 B&C high excursion woofer with 3 voice coil Frequency response from 33Hz to 100Hz 1200W RMS Class D power amplifier with switching mode power supply DSP Processor with 8 presets, cardioid configuration, delay Control Panel with XLR input and link, volume, presets, delay, phase 0 ° -180 °, ground-lift Neutrik powerCON True1 power IN and LINK connectors 15mm (5/8) birch plywood with scratch-resistant coating Stackable M20 (20mm) top mount speaker stand socket, two diecast aluminum carrying handles with rubber inserts Optional 4 swivel-mount casters 80mm (3.15) on request Suitable for low-frequency extension and reinforcement of the CLA406A array, especially for live performance. MORE»
| List | $3,865.00 |
CLA-208-SA Active Bass reflex subwoofer - 2x8 - 600Wrms The Vertus CLA 208SA is a 2 x 8" active subwoofer bass-reflex design featuring a birch ply enclosure. The internal Class D amplifier delivers 600W 129dB SPL ideal for extending the CLA604A's low-frequency performance in live applications. The CLA208SA subwoofers are modular as well, and they can be stacked to enlarge and increase the maximum SPL. Black finish CLA 208SA is a 2 x 8" active subwoofer in bass-reflex design and birch ply enclosure. The internal Class D amplifier delivers 600W and is matched with a switch mode power supply and a DSP processor with filtering functions, equalization and speaker protection. Created with the idea of extending the CLA608A's low frequency performance in live applications, the CLA208SA serves as the base support for the CLA604A column speaker which can either be frontally mounted to the sub, as well as fixed upon the optional stand through the M20 socket on the upside of the sub. The CLA208SA subwoofers are modular as well, and they can be stacked to enlarge and increase the maximum SPL. CLA system features: High-level sound quality from 50Hz to 20kHz expressly developed for live performance Long-distance sound projection and better SPL distribution toward the audience Great and dynamic power performance thanks to the tri-amplification system Lightweight and easy to carry Design and elegance for easy integration even in the most demanding installations Very compact dimensions enable the listener to concentrate on sound and not on speakers! High horizontal dispersion The internal XLR signal link system and Neutrik Powercon power supply on both the sub and the satellite, allow for hiding wires and cables from open sight, preserving the system's clean aesthetics. MORE»
| List | $1,905.00 |
CLA-208-SA-W Active Bass reflex subwoofer - 2x8 - 600Wrms (White). The Vertus CLA 208SAW is a 2 x 8" active subwoofer bass-reflex design featuring a birch ply enclosure. The internal Class D amplifier delivers 600W 129dB SPL ideal for extending the CLA604A's low-frequency performance in live applications. The CLA208SA subwoofers are modular as well, and they can be stacked to enlarge and increase the maximum SPL. White Finish CLA 208SAW is a 2 x 8" active subwoofer in bass-reflex design and birch ply enclosure. The internal Class D amplifier delivers 600W and is matched with a switch-mode power supply and a DSP processor with filtering functions, equalization, and speaker protection. Created with the idea of extending the CLA608A's low-frequency performance in live applications, the CLA208SAW serves as the base support for the CLA604A column speaker which can either be frontally mounted to the sub, as well as fixed upon the optional stand through the M20 socket on the upside of the sub. The CLA208SAW subwoofers are modular as well, and they can be stacked to enlarge and increase the maximum SPL. CLA system features: High-level sound quality from 50Hz to 20kHz expressly developed for live performance Long-distance sound projection and better SPL distribution toward the audience Great and dynamic power performance thanks to the tri-amplification system Lightweight and easy to carry Design and elegance for easy integration even in the most demanding installations Very compact dimensions enable the listener to concentrate on sound and not on speakers! High horizontal dispersion The internal XLR signal link system and Neutrik Powercon power supply on both the sub and the satellite, allow for hiding wires and cables from open sight, preserving the system's clean aesthetics. MORE»
| List | $1,905.00 |
MITUS-118FSA Flyable Compact 18" Subwoofer, can be hung forwards or rearwards - 1200Wrms The MITUS 118FSA is a cardioid arrayable and flyable subwoofer. It is designed and manufactured by FBT's renowned engineers and artisans, the Mitus 118FSA is a prime example of audio perfection with ergonomic innovations. The Mitus 118FSA is a hybrid loaded 18" neodymium subwoofer designed to suspend from a MT-F 212 flybar either facing forward (FSA model) or rearward (FSCA model). Compact hybrid bandpass cardioid-arrayable subwoofer. Hybrid configuration permits to obtain extension and speed of vented with high SPL and acoustic filtering of bandpass Suspension hardware is fully compatible with MITUS206La allowing the enclosure to be suspended front (FSA model) or rear-firing (FSCA model) for easy cardioid configurations Large area laminar-flow port to ensure no power compression and very low port turbulence For cardioid configurations with one SUB-rear-firing and two sub-front-firing, more than 15dB SPL rejection can be obtained behind the array 18" (460mm) custom B&C neodymium magnet high excursion woofer with a 3.5" (88mm) voice coil Frequency Response from 33Hz to 1Hz Class D amplifier delivering 1200WRMS Switch-mode power supply DSP with 8 presets, cardioid and with infra configurations, delay Control panel with XLR input and link, volume, presets, delay, phase 0°-180°, ground-lift 5/8" (15mm) birch plywood enclosure, scratch-resistant black paint Low-frequency extension cabinet for the MITUS 206LA line array for flying or ground-stacked configurations Very low profile for an 18" size woofer MORE»
| List | $4,945.00 |
MITUS-212-FS Flyable Passive Subwoofer - 2x12" - 1000Wrms The FBT MITUS 212FS is a passive 2 x 12" B&C with a 3" Voice coil compact and flyable subwoofer. When combined together in a ground-stacked or flying array it extends the low frequencies of the MITUS 206L line array system. The FBT MITUS 212FS is a 2 x 12" compact and flyable subwoofer which can extend the low frequencies of the MITUS 206L when combined together in ground-stacked or flying arrays. The modularity of the FBT MITUS 212FS makes it extremely flexible for a wide range of applications, from a small system to an elaborate line array system consisting of up to 12 MITUS 206L cabinets along with multiple FBT MITUS 212FS subs for large concert events. The FBT MITUS 212FS shall meet the following performance criteria: Frequency response of 50Hz to 250Hz,Frequency sensitivity of 99dB, Maximum SPL of 134dB continuous and 138dB peak, Recommended power amplifier 1000W RMS/8 Ohm. The MITUS 212FS feature Baltic birch plywood construction covered in a scratch-resistant black paint with an M20 top-mounted stand adapter. Input connectors shall be parallel wired Neutrik NL4 Speakon. 1000W -138dB SPL MORE»
| List | $3,090.00 |
MITUS-212-FSA Processed Flyable Active Subwoofer - 2x12" - 1200Wrms. The FBT MITUS 212FSA is an Active 2 x 12" B&C with a 3" Voice coil compact and a flyable subwoofer that can extend the low frequencies of the MITUS 206L when combined together in ground-stacked or flying arrays. Built-in amplifier Delivering 1200W Β 138dB SPL It can also be utilized as a flyable "Mid-Sub" extension when paired with the Mitus 206LA active line array, and an additional subwoofer. Compact vented subwoofer sharing the same width and suspension hardware as the MITUS 206L 320 mm (2 x 12) B&C neodymium magnet high excursion subwoofers with 75 mm (3) voice coils Frequency Response from 50Hz to 120Hz Neutrik Speakon NL- 4MDV connectors IN & LINK OUT External digital processor required 15 mm (5/8) birch plywood enclosure, scratch-resistant black paint Low-frequency extension cabinet for the MITUS 206L line array for flying or ground-stacked configurations. M20 top mount stand socket MORE»
| List | $3,865.00 |
MUSE-118-FS Cardioid-Arrayable Flyable Passive 1x18' Subwoofer - 1200Wrms (front version) 139dB SPL Flyable Passive Subwoofer The passive version recommended an amplifier of 1200Wrms / 8ohm Neutrik Speakon NL- 4MDV connectors IN & LINK OUT External digital processor required Compact Hybrid bandpass cardioid-arrayable subwoofer. The hybrid configuration permits to obtaining extension and speed of vented with high SPL and acoustic filtering of bandpass Suspension hardware is fully compatible with MUSE210L allowing the enclosure to be suspended front or rear-firing for easy cardioid configurations Very large area laminar-flow port to ensure no power compression and very low port turbulence 18 (460mm) custom B&C neodymium magnet high excursion woofer with 3 (75mm) voice coil Frequency Response from 33Hz @-6dB 5/8 (15mm) birch plywood enclosure, scratch-resistant black paint, 4 aluminum handles and heavy-duty metal grille with synthetic protection cloth M20 top mount stand socket Optional 4 swivel-mount 4 (100mm) casters Low-frequency extension cabinet for the MUSE210L line array for flying or ground-stacked configurations MORE»
| List | $4,530.00 |
MUSE-118FSA Flyable compact 18" subwoofer, hung forwards or rewards - 1200Watts RMS Compact Hybrid bandpass cardioid-arrayable subwoofer. Hybrid configuration permits obtaining extension and speed of vented with high SPL and acoustic filtering of bandpass Suspension hardware is fully compatible with MUSE210La allowing the enclosure to be suspended front or rear-firing for easy cardioid configurations The subwoofer can be suspended facing forward or rearward and user-configurable with the capability of front- or rear- mounting the grille and amp module for aesthetic uniformity in cardioid configuration.7 Very large area laminar-flow port to ensure no power compression and very low port turbulence For cardioid configurations with one SUB-rear-firing and two sub-front-firing, more than 15db SPL rejection can be obtained behind the array 18 (460mm) custom B&C neodymium magnet high excursion woofer with 3 (75mm) voice coil Frequency Response from 33Hz to 1Hz Class D amplifier delivering 1200WRMS Switch-mode power supply MORE»
| List | $5,150.00 |
Cardioid-Arrayable Flyable Subwoofer -1x18'' -1600Wrms - INFINITO & Dante MUSE 118FSN is an innovative powered subwoofer designed to create suspended clusters with omnidirectional or cardioid directivity, guaranteeing the same excellent aesthetic result. Equipped with B&C 18 (460mm) neodymium woofer with 3.5 (88mm) voice coil and 1600W RMS amplifier capable of 140dB SPL, MUSE 118FSND is ideal to be suspended together with MUSE 210LND powered line array or in a separate cluster. MORE»
MUSE-218S Passive Subwoofer Bass Reflex 2x18" 4000W RMS MUSE-218S is an innovative powered subwoofer designed to create suspended clusters with omnidirectional or cardioid directivity, guaranteeing the same excellent aesthetic result. Equipped with two B&C 18 (460mm) neodymium woofers with a 4" voice coil. 140dB SPL Ground stack direct load subwoofer Very large area reflex port to ensure no power compression and very low port turbulence Double 18 (460mm) B&C very high excursion woofer with 4 (100mm) voice coil Frequency Response from 30Hz @-6dB (18mm) birch plywood enclosure, scratch-resistant black paint, 6 handles, and heavy-duty metal grille with synthetic protection cloth M20 top mount stand socket Optional 4 swivel-mount 4 (100mm) casters MUSE-218S is ideal to be suspended together with the MUSE 210 line array or in a separate cluster. MORE»
MUSE-218SN Active Subwoofer - 2x18" - 4000 Watts RMS w/Infinito The MUSE 218 SN is both Ground-breaking and Earth-shattering. Offering 4000w of subwoofer power, it is the perfect partner for the New MUSE 210 LN. Network control is powered by the incredible Infinito software. Low-frequency extension cabinet for the MUSE 210LN line array for ground-stacked configurations. MORE»
MUSE-218SND Active Subwoofer - 2x18" - 4000 Watts RMS w/Dante+Infinito The MUSE 218 SND is both Ground-breaking and Earth-shattering. Offering 4000w of subwoofer power, it is the perfect partner for the New MUSE 210 LND. Network control is powered by the incredible Infinito software with the option on DANTE. Ground stack direct load subwoofer Very large area reflex port to ensure no power compression and very low port turbulence Double 18 (460mm) B&C very high excursion woofer with 4 (100mm) voice coil Frequency Response from 30Hz @-6dB Class D amplifier delivering 4000W RMS with switch mode power supply Network interface TCP/IP OCA70 compatible EtherCon RJ45 input and output for daisy-chain OLED DISPLAY and ENCODER with PUSH for easy onboard control DANTE audio streaming with 24bit at 48-96KHz on TCP/IP network 0.7 (18mm) birch plywood enclosure, scratch-resistant black paint, 6 handles and heavy-duty metal grille with synthetic protection cloth M20 top mount stand socket Optional 4 swivel-mount 4 (100mm) casters Low-frequency extension cabinet for the MUSE 210LND line array for ground-stacked configurations MORE»
MYRA 218S Passive Reflex Loaded Subwoofer 2x18" - 3000Wrms The Myra 218S is a Reflex Loaded Active Subwoofer with a 3000W RMS to 143dB SPL. It is made of premium Baltic birch and polyurea coating to give a professional finish and ensure that it stays protected while on the road. Dual 18 inch reflex-loaded subwoofer 2 x 457mm (18 inch) custom woofers with 100mm (4 inch) voice coils Frequency response down to 30Hz Neutrik speakON input and link connectors Cabinet in premium-grade Baltic birch plywood with polyurea coating Curved tuning port for decreased airflow velocity and reduced turbulence Optimized vent shape reduces port compression and maintains linearity Standard and cardioid presets are available MORE»
The Q118SA is an Active ceramic B&C 18" Subwoofer with a 4" Voice coil The built-in amplifier module has 6 DSP presets and is rated at 1200 watts RMS and delivers 137dB SPL. Made from 18mm Baltic birch ply the enclosure is tough and rugged with 4 aluminum handles. KEY FEATURES 18" woofer with 4" voice coil 1200W RMS Class D power amplifier with switch mode power supply DSP with 6 presets, digital 6 step Delay Control panel with 3 status led indicators, Phase, Level, Preset, Delay, stereo XLR in/link, Power supply with powerCON TRUE1 cable duplex with input and output 0.70" baltic birch plywood cabinet with scratch and scuff resistant paint finish 2 M20 top mount speaker stand socket, 4 aluminum carrying handles, optional wheels MORE»
| List | $3,810.00 |
SHADOW-114S 14" all-weather subwoofer, 8 ohm, 350W recommended This is a compact, low frequency system for additional low end. SHADOW 114S system has the same enclosure and hardware accessories of the SHADOW 112, with additional extended low frequencies reproduction to provide a wide range of applications. 14 Subwoofer 700W/8ohm - 129,5dB SPL 14 woofer with 3 coil An optional transformer model, SHADOW 114ST, is also available providing impedance matching to 100V lines, with 300W power. 4 wires cable to select the desired power tapping Sturdy molded polyethylene curved enclosure Water-resistant grill with 3 layers of protection Steel U bracket and other included hardware accessories IP55 weather resistant MORE»
| List | $1,340.00 |
SUBLINE-112-SA Processed Compact Band-pass Active Subwoofer - 12" - 600Wrms. 8 Ohms - 133dB SPL The SubLine 112SA is a tiny compact ACTIVE sub weighing just 23Kg. Yet delivers an amazing punch. The built-in amplifier is 700Watts at 8 Ohms it will deliver 133dB SPL from the 12", 3" Voice coil driver. Incredible input flexibility with 2.1 option and power con true 1 in and out. This great combination is in a Baltic birch plywood cabinet completely made in Italy. The SUBline 112SA has been completely redesigned with a bass-reflex configuration, built with birch plywood, and aimed to extend the low-frequency response to a wide range of FBT speaker systems. Created with the aim to maximize SPL/SIZE ratio, they have Class D amplifiers, a switch-mode power supply, and Digital Signal Processor with presets to match any other FBT speaker. With IN/OUT stereo connectors, it is possible to use only one subwoofer with Left and Right speakers. The Neutrik TRUE1 Power connection negates the need for a power switch while offering a solid locking connection. Ergonomic integrated carrying handles and tour-grade plywood cabinets allow an easy transport. MORE»
| List | $1,955.00 |
SUBLINE-115-SA Processed Compact Band-pass Active Subwoofer - 15" - 600Wrms / 135dB SPL The SUBline 115SA has been completely redesigned with a bass-reflex configuration, built with birch plywood, and aimed to extend the low-frequency response to a wide range of FBT speaker systems. Created with the aim to maximize SPL/SIZE ratio, they have Class D amplifiers, a switch-mode power supply, and Digital Signal Processor with presets to match any other FBT speaker. With IN/OUT stereo connectors, it is possible to use only one subwoofer with Left and Right speakers. The Neutrik TRUE1 Power connection negates the need for a power switch while offering a solid locking connection. Optional wheels, ergonomic integrated carrying handles, and tour-grade plywood cabinets allow easy transport. MORE»
| List | $2,265.00 |
SUBLINE-118-SA Processed Compact Bass reflex Active Subwoofer - 18" - 1200Wrms The SUBline 118SA has been completely redesigned with a bass-reflex configuration, built with birch plywood, and aimed to extend the low-frequency response to a wide range of FBT speaker systems. Created with the aim to maximize SPL/SIZE ratio, they have Class D amplifiers, switch mode power supply, and Digital Signal Processor with presets to match any other FBT speaker. With IN/OUT stereo connectors, it is possible to use only one subwoofer with Left and Right speakers. The Neutrik TRUE1 Power connection negates the need for a power switch while offering a solid locking connection. Optional wheels, ergonomic integrated carrying handles, and tour-grade plywood cabinets allow easy transport. MORE»
| List | $3,295.00 |
SUBLINE-218-SA Active Subwoofer - 2x18" 1200W RMS - 140dB SPL The SUBLINE 218SA active subwoofer is built with birch 5/8 plywood with scratch & scuff-resistant paint finish. Aimed to extend the low-frequency response to a wide range of FBT speaker systems. Designed with a Band Pass configuration It has a Class D amplifier, switch-mode power supply, and Digital Signal Processor with presets to match any other FBT speaker. IN/OUT stereo, it is possible to use only one subwoofer with Left and Right satellites. Neutrik TRUE1 Power connection negates the need for a switch and provides a secure connection. Additional optional wheels, ergonomic integrated carrying handles and a light cabinet allow easy transport. Bass-reflex design Subwoofer 2 x 460mm (18) high excursion woofer with 75mm (3) voice coil, custom made for FBT by B&C Frequency response from 30Hz to 120Hz 1200W RMS Class D power amplifier with switch mode power supply DSP with 6 presets, 3 x EQ with 2 x LPF crossover settings, 6-step digital delay line Control panel with stereo XLR in/out, Volume. EQ presets, Delay, Phase reversal switch 0°-180°, 3 status LED indicators 18mm Baltic birch plywood enclosure with heavy-duty coating 2 x M20 threads for stand pole mount and 4 x aluminum ergonomic FBT handles, optional wheels Provides additional low-frequency extension when used along with MUSE 210LA active line array system MORE»
| List | $6,285.00 |
VHA-112-SA Vertical Horizontal Flyable Active Subwoofer 1x12" - 1200 Watt RMS The VHA112SA flyable and ground stackable bass-extension module seamlessly matches the VHA406A in both size and shape yet houses a single 12" long-excursion B & C woofer. The bass-reflex design incorporates a 1200 W Class-D amplifier module and includes onboard DSP with filtering, equalization, and limiting. Bass-reflex amplified subwoofer 320 High-excursion 320mm (12") Woofer B&C Frequency response from 45Hz to 120Hz 1200Wrms class D amplifier with switching mode power supply DSP processor with 8 presets, delay Control panel with XLR input and link, volume, presets, delay, ground-lift Neutrik PowerCON TRUE1 IN and LINK power connectors Cabinet in 12mm (0.5") birch plywood with anti-scratch varnish. Handles with rubber inserts and rubber-coated sides to protect the cabinet from bumps and scratches. Ideal for reinforcing and extending the low range of the VHA406A line array in the 45Hz - 120Hz range MORE»
| List | $4,840.00 |
VHA-118-SA 18" High Output Active Subwoofer - 1x18" - 2500Wrms The ground-stacked VHA118SA is an exceptionally powerful and versatile subwoofer that sets a new standard for SPL to size ratio. Comprising a single 18" long-excursion B & C woofer, the birch plywood, bass reflex sub, features a 2,500W Class-D amplifier module with 143dB SPL and offers a selection of six entirely rewritten preset algorithms. MORE»
| List | $6,180.00 |
VHA118SN Processed Bass reflex Active Subwoofer - 1x18" - 2500Wrms - Infinito The design of the VHA118SN has produced a unique low-end module that is capable of generating extremely high levels of SPL for prolonged periods. Using BEM finite element simulations, FBT has optimized the woofers load volume, while the careful study of the grille and the assemblys protective fabric has minimized acoustic impedance for a net improvement in performance, compared to previous models. The VHA118SN extends the overall system frequency response to 30Hz while supporting fully ground-stacked configurations, courtesy of special integrated mounting hardware. MORE»
VHA118SND Processed Bass reflex Active Subwoofer - 1x18" - 2500Wrms- Dante and Infinito The design of the VHA118SND has produced a unique low-end module that is capable of generating extremely high levels of SPL for prolonged periods. Using BEM finite element simulations, FBT has optimized the woofers load volume, while the careful study of the grille and the assemblys protective fabric has minimized acoustic impedance for a net improvement in performance, compared to previous models. The VHA118SND extends the overall system frequency response to 30Hz while supporting fully ground-stacked configurations, courtesy of a special integrated mounting hardware. MORE»
18" PASSIVE Subwoofer 1600 watts peak power Neodymium components Industrial grade 15mm 9-ply braced cabinets 35Hz 150Hz frequency range Speakon NL4 connections Robust metal grill MORE»
| List | $1,009.00 |
VENTURE-18SA - 18" ACTIVE Subwoofer 900 watts peak power Class D amplification Industrial grade 15mm 9-ply braced cabinets 35Hz 150Hz frequency range Robust metal grill MORE»
| List | $1,209.00 |
