Ernie Ball microphone 685 feature a high-quality design made with superior components that are built to last. Dual-conductors deliver a reliably clear signal and natural frequency response. Multiple shielding materials preserve the signal with low handling noise, and the durable PVC jacket exterior ensures long-lasting performance. Cable length 25ft (7.62m)
MORE»| List | $49.99 |
Ideal for ball-type mics, the MWS225 works for a backup or when you really need to replace yours after long hours of use. Protect your microphones against wind interference and singers' spit and reduce unwanted breath. MORE»
| List | $3.91 |
801C3 adapter and cable, 3 pin mini XLR MORE»
| List | $15.00 |
801C4 adapter with cable, 4 pin mini XLR MORE»
| List | $15.00 |
801CR adapter with cable, 4 pin Hirose connector MORE»
| List | $20.00 |
801CS adapter with cable, 3.5mm stereo plug MORE»
| List | $17.00 |
Aerobic Arm Bag, Large (for PT, SIEM) The Aerobics Arm Bag is perfect for fitness instructors or indeed anybody who needs a safe, secure and comfortable solution to wearing and body pack transmitter or receiver. The AAB-L large bag fits wireless microphone belt pack type transmitters with dimensions up to 78mm wide x 34mm deep and 106mm high MORE»
| List | $20.00 |
Charging station, for transmitters UF-20TB/5, JSS-20/5, JSS-4B/5, R-4TBM/5 and RU-G3TB/5. For simultaneously charging rech. batteries of 2 devices Average charging time, depending on condition of rechargeable batteries used: approx. 3 hours Each slot with LED for indicating a fault and battery charging status Mechanical reverse polarity protection Protection against overload, short-circuit and deep discharge Power is provided via enclosed power supply Dimensions: 165 x 72 x 99 mm MORE»
| List | $199.00 |
CH-8 Transport case with integrated charging function For simultaneously charging rech. batteries of 8 devices Average charging time, depending on capacity and condition of rechargeable batteries used: approx. 3 hours Each slot with LED for indicating a fault and battery charging status Mechanical reverse polarity protection Protection against overload, short-circuit, and deep discharge Power is provided via supplied power supply Dimensions: 357 x 294 x 433 mm MORE»
| List | $1,065.00 |
CLP-6 Metal Drum Microphone Holder Clips to the rim of the drum, the sliding mechanism allows proximity adjustment to the drumhead. * Suitable for TX-6 and NX-6 MORE»
| List | $31.00 |
Clip for CM-804i Beige #12489-001 MORE»
| List | $4.00 |
CS-120CU works as a main unit of the whole system. It provides all inputs and outputs needed to manage a complex audio system. A single CS-120CU can be connected with 90 sets of CS-120CH and CS-120DU. With the additional power unit, CS-120EMU up to 256 sets can be connected. This stand-alone system provides 4 types of conferencing modes, Open, Over-ride, Voice, and Apply. It meets most conference requirements. A voting function is also provided. A large LCD screen provides detailed information. The soft-key design provides intuitive operation Maximum 4 video cameras can be connected to perform video tracking. MORE»
| List | $1,795.00 |
CX-500 Subminiature Condenser Instrument Microphone (Omni) The CX-500 provides clean, detailed, and natural sound quality with a subminiature condenser capsule. The tailed response curve works best with string instruments like violin and guitars besides many other instruments. Various mount kits are bundled for the best fit for any kind of instrument. With sophisticated capsule technology and tailored fixtures, the CX-500 can pick up every trill of strings. The bundled MA-500 adapter makes CX-500 capable of both wired and wireless applications. MORE»
| List | $139.00 |
Extension Cable 10 Meter Din 7 pin XLR-F / XLR-M Length: 10M MORE»
| List | $55.00 |
D7P-20 7-Pin 20 Meter Extension Cable Extension cable 7-pole DIN plug to 7-pole DIN jack Length: 20 m MORE»
| List | $85.00 |
HB-990 ABS Carry Case for Wireless Handheld or Bodypack Transmitters MORE»
| List | $25.00 |
MA-500 Phantom Power Adaptor provides power to miniature condenser microphones through phantom power. It works with CM series condenser microphones and part of CX series microphones with mini XLR connector. MA-500/MA-500E can be powered by JTS’s PS-1, Phantom Power Supply or 12V to 48V phantom power from other devices. MORE»
| List | $45.00 |
Microphone Stand Clip NX-8.8 and NX-9 MORE»
| List | $6.00 |
Microphone Stand Clip for JS-22, NX-9, TX-9, CX-509 and shot gun microphones MORE»
| List | $16.00 |
Microphone Stand Clip for standard wired microphones MORE»
| List | $6.00 |
Microphone Stand Clip for standard wireless microphones MORE»
| List | $6.00 |
Windscreen for UT-16HW Aerobic Microphone, Black #12520 MORE»
| List | $2.00 |
Windscreen for CM-201 Lapel Microphone, Beige #97506-010 MORE»
| List | $2.00 |
Windscreen for CM-201 Lapel Microphone, Black MORE»
| List | $2.00 |
MS-22 Windscreen for JS22, GM-5212/18T, FGM-62T/170T Suitable for JS-22, GM-5212T, GM-5218T, FGM-62T Carbon, FGM-62T Carbon Dual, FGM-170T Carbon and FGM-170T Carbon Dual. MORE»
| List | $4.00 |
Windscreen for CM-501 Lapel Microphone, Black # 12468 MORE»
| List | $2.00 |
MS-G5 Windscreen for GM, GML and FGM series Gooseneck Microphoness MORE»
| List | $4.00 |
