CLA-206A 2-way Active Line Array Column - 2x6.5”LF + 1x1.4”HF - 600Wrms+300Wrms Stand-alone or as a part of the CLA 604.2A system, the CLA 206A 2 x 6.5" + 1 x 1.4" active cabinet excels for both SPL and audio articulation. Now making life easier for those on the road, both the CLA406.2A and more compact CLA206A have been designed with portability in mind, from the rugged hardware to new accessories which make set-up both extremely quick and highly intuitive. Bi-amplified 2-way line array 2 x 165mm (6.5 inches) custom woofers with 38mm (1.5 inch) coil Neodymium B&C compression HF driver with 36mm (1.4 inch) throat and 64mm (2.5 inch) coil Large format FBT waveguide with 100 H x 25 degrees V dispersion Frequency response from 65Hz to 20KHz Class-D 600Wrms for LF and 300Wrms for HF amplifiers with switching mode power supply DSP processor with 8 equalization presets Control panel with XLR input and link, volume, presets, filter-HP, ground-lift Neutrik PowerCON IN and LINK power connectors Cabinet in 12mm (0.5 inches) birch plywood with scratch-resistant varnish, two side handles, rubber inserts for protection, and anti-slip upper and lower 4 lateral inserts, two upper and two lower points designed to accept quick release pins or M10 screws. New hardware for flying installations, for ground setups, and the possibility of coupling two or more CLA 406A / CLA 206A with an angle of 0 - 20 degrees in 5-degree steps vertically, all with optional quick release pins for touring. The topside is inclined 20 degrees to have maximum flexibility of use in combination with other CLA 206A or CLA 406A in order to adapt the vertical dispersion angle of the system to the listening area. The system can be used both in small point source systems with the CLA 118SA sub and in clusters of two to have a dispersion of 40 degrees (V). It can also be considered a down-fill for CLA 406A systems. MORE»
| List | $2,780.00 |
CLA-208-SA Active Bass reflex subwoofer - 2x8” - 600Wrms The Vertus CLA 208SA is a 2 x 8" active subwoofer bass-reflex design featuring a birch ply enclosure. The internal Class D amplifier delivers 600W 129dB SPL ideal for extending the CLA604A's low-frequency performance in live applications. The CLA208SA subwoofers are modular as well, and they can be stacked to enlarge and increase the maximum SPL. Black finish CLA 208SA is a 2 x 8" active subwoofer in bass-reflex design and birch ply enclosure. The internal Class D amplifier delivers 600W and is matched with a switch mode power supply and a DSP processor with filtering functions, equalization and speaker protection. Created with the idea of extending the CLA608A's low frequency performance in live applications, the CLA208SA serves as the base support for the CLA604A column speaker which can either be frontally mounted to the sub, as well as fixed upon the optional stand through the M20 socket on the upside of the sub. The CLA208SA subwoofers are modular as well, and they can be stacked to enlarge and increase the maximum SPL. CLA system features: High-level sound quality from 50Hz to 20kHz expressly developed for live performance Long-distance sound projection and better SPL distribution toward the audience Great and dynamic power performance thanks to the tri-amplification system Lightweight and easy to carry Design and elegance for easy integration even in the most demanding installations Very compact dimensions enable the listener to concentrate on sound and not on speakers! High horizontal dispersion The internal XLR signal link system and Neutrik Powercon power supply on both the sub and the satellite, allow for hiding wires and cables from open sight, preserving the system's clean aesthetics. MORE»
| List | $1,905.00 |
CLA-208-SA-W Active Bass reflex subwoofer - 2x8” - 600Wrms (White). The Vertus CLA 208SAW is a 2 x 8" active subwoofer bass-reflex design featuring a birch ply enclosure. The internal Class D amplifier delivers 600W 129dB SPL ideal for extending the CLA604A's low-frequency performance in live applications. The CLA208SA subwoofers are modular as well, and they can be stacked to enlarge and increase the maximum SPL. White Finish CLA 208SAW is a 2 x 8" active subwoofer in bass-reflex design and birch ply enclosure. The internal Class D amplifier delivers 600W and is matched with a switch-mode power supply and a DSP processor with filtering functions, equalization, and speaker protection. Created with the idea of extending the CLA608A's low-frequency performance in live applications, the CLA208SAW serves as the base support for the CLA604A column speaker which can either be frontally mounted to the sub, as well as fixed upon the optional stand through the M20 socket on the upside of the sub. The CLA208SAW subwoofers are modular as well, and they can be stacked to enlarge and increase the maximum SPL. CLA system features: High-level sound quality from 50Hz to 20kHz expressly developed for live performance Long-distance sound projection and better SPL distribution toward the audience Great and dynamic power performance thanks to the tri-amplification system Lightweight and easy to carry Design and elegance for easy integration even in the most demanding installations Very compact dimensions enable the listener to concentrate on sound and not on speakers! High horizontal dispersion The internal XLR signal link system and Neutrik Powercon power supply on both the sub and the satellite, allow for hiding wires and cables from open sight, preserving the system's clean aesthetics. MORE»
| List | $1,905.00 |
CLA-604-A 2-way Active Line Array Column - 6x4" - 400Wrms+100Wrms 125db SPL The Vertus CLA 604 Active Column Line Array has a 6 x 4” custom woofer with a 1” voice coil and 4 x 1” dome neodymium tweeter on a waveguide. The built-in amplifier delivers 400W + 100W RMS to achieve 125DB SPL Designed to work with the CLA 208SA Subs. Black Finish CLA604A is an extruded aluminum column speaker fitted with 6 x 4" custom woofers and 4 x 1" dome tweeters, each coupled to a waveguide. The internal Class D amplification, 400W for woofers and 100W for tweeters with switch mode power supply and DSP processor with 4 equalization presets provide unexpected dynamics in a system of these dimensions. The rapid latching system with pins allows for the expansion of the system, doubling-up CLA604A modules to form a unified column with an absolute and coherent source integration and increase of SPL and low-frequency directivity control. CLA system features: High-level sound quality from 50Hz to 20kHz expressly developed for live performance Long-distance sound projection and better SPL distribution toward the audience Great and dynamic power performance thanks to a tri-amplification system Lightweight and easy to carry Design and elegance for easy integration even in the most demanding installations Very compact dimensions enable the listener to concentrate on sound and not on speakers! High horizontal dispersion 2-Way Bi-Amped 6x 4" Neodymium woofer 4x 1" Neodymium tweeter with horn 400W Class D amplifier for the bass range 100W Class D amplifier for high frequencies Built-in switched-mode power supply DSP Processor with 4 equalizers presets Control panel with volume, presets, HP filter, mic/ line, status LED Aluminum housing (deep-drawn) Powder-coated surface Tripod or wall mountable Frequency range: 130 Hz - 20 kHz Max. SPL: 125 dB 100° x 20° XLR Signal and power twist for power input and output Dimensions: 130 x 841 x 130 mm Weight: 9 kg Color: Black or White MORE»
| List | $2,060.00 |
CLA-604-A-W 2-way Active Line Array Column - 6x4" White. 125db SPL The Vertus CLA 604 Active Column Line Array has a 6 x 4” custom woofer with a 1” voice coil and 4 x 1” dome neodymium tweeter on a waveguide. The built-in amplifier delivers 400W + 100W RMS to achieve 125DB SPL Designed to work with the CLA 208SA Subs. Black Finish CLA604A is an extruded aluminum column speaker fitted with 6 x 4" custom woofers and 4 x 1" dome tweeters, each coupled to a waveguide. The internal Class D amplification, 400W for woofers and 100W for tweeters with switch mode power supply and DSP processor with 4 equalization presets provide unexpected dynamics in a system of these dimensions. The rapid latching system with pins allows for the expansion of the system, doubling-up CLA604A modules to form a unified column with an absolute and coherent source integration and increase of SPL and low-frequency directivity control. CLA system features: High-level sound quality from 50Hz to 20kHz expressly developed for live performance Long-distance sound projection and better SPL distribution toward the audience Great and dynamic power performance thanks to a tri-amplification system Lightweight and easy to carry Design and elegance for easy integration even in the most demanding installations Very compact dimensions enable the listener to concentrate on sound and not on speakers! High horizontal dispersion 2-Way Bi-Amped 6x 4" Neodymium woofer 4x 1" Neodymium tweeter with horn 400W Class D amplifier for the bass range 100W Class D amplifier for high frequencies Built-in switched-mode power supply DSP Processor with 4 equalizers presets Control panel with volume, presets, HP filter, mic/ line, status LED Aluminum housing (deep-drawn) Powder-coated surface Tripod or wall mountable Frequency range: 130 Hz - 20 kHz Max. SPL: 125 dB 100° x 20° XLR Signal and power twist for power input and output Dimensions: 130 x 841 x 130 mm Weight: 9 kg Color: Black or White MORE»
| List | $2,060.00 |
CS-1000 Active Complete System - 12" subwoofer w/ Satellite 1000Wrms. Compact Line Array System 600W + 400W RMS -129 DB SPL Created as a no-compromise choice for both live performers and installers, the VERTUS CS1000 compact line array combines maximum performance with a modular, scalable approach. Its lightweight but sturdy construction blended with FBT’s distinctive engineering and elegance has delivered a system that can be deployed on stage within minutes, or discreetly integrated into the most delicate of decors to provide high-quality sound and controlled directivity. A bi-amplified design, the system comprises a long excursion 12” bass reflex subwoofer and a passive mounted satellite, linked via a Neutrik SPEAKON connector and equipped with six full-range neodymium 3” drivers. Onboard the subwoofer is a Class-D, two channel amplifier, complete with switch-mode power supply, delivering 600W RMS to the subwoofer and 400W RMS to the satellite, both of which are housed in birch plywood enclosures. For ease of use, a storage compartment is provided within the subwoofer enclosure to securely house both the satellite speaker and its supplied mounting pole for storage and transport. A dedicated locking system holds all of the equipment in place. MORE»
| List | $2,680.00 |
CS-1000-W Active Complete System - 12" subwoofer w/ Satellite 1000Wrms. 129 DB SPL - WHITE Created as a no-compromise choice for both live performers and installers, the VERTUS CS1000 compact line array combines maximum performance with a modular, scalable approach. Its lightweight but sturdy construction blended with FBT’s distinctive engineering and elegance has delivered a system that can be deployed on stage within minutes, or discreetly integrated into the most delicate of decors to provide high-quality sound and controlled directivity. A bi-amplified design, the system comprises a long excursion 12” bass reflex subwoofer and a passive mounted satellite, linked via a Neutrik SPEAKON connector and equipped with six full-range neodymium 3” drivers. Onboard the subwoofer is a Class-D, two channel amplifier, complete with switch-mode power supply, delivering 600W RMS to the subwoofer and 400W RMS to the satellite, both of which are housed in birch plywood enclosures. For ease of use, a storage compartment is provided within the subwoofer enclosure to securely house both the satellite speaker and its supplied mounting pole for storage and transport. A dedicated locking system holds all of the equipment in place. Modular design allows two systems to be configured as one single solution via optional accessories Bass reflex stackable subwoofer in a birch plywood enclosure with diecast aluminum handle and rubber inserts, plus M20 support and a custom pole-mount solution facilitating adjustable height and vertical aiming The satellite and pole are fully integrated into the subwoofer cabinet, where a push button system locks the satellite in place for transportation The satellite is equipped with a coupling system for accessories that allows the extension of the length of the line array, positioning one atop the other. Alternatively, the same system allows the satellite to be permanently wall-mounted. Ideal for both live applications and fixed installations Easily expandable to a total power of 8.000W peak (via a stereo system consisting of 4 x VERTUS CS1000, positioned two per side) MORE»
| List | $2,680.00 |
VT-J1000 joining bar to interconnect two CS-1000 compact line array systems. *Please ensure the top satellite is inverted to ensure correct phase alignment. MORE»
| List | $185.40 |
Harbinger's M200-BT portable PA with Bluetooth offers powerful, versatile sound in a portable package. It provides seven inputs at once, including four mic/line channels (including two with guitar inputs), high, low and echo controls on each channel, plus an overall 5-band graphic EQ. The M200-BT PA system offers 800W of power through two 10" speakers with full-frequency sound. With Bluetooth connectivity, the M200-BT makes wireless streaming and playback easy. Three custom carrying bags allow for comfortable transport between gigs.
The M200-BT's built-in Bluetooth receiver allows for simple wireless pairing to smartphones, tablets and laptops, enabling cable-free music streaming. Stream your favorite playlists and audio with the tap of a finger using the Bluetooth feature.
To guard the M200-BT during transport and storage, Harbinger includes a set of speaker bags with convenient hand straps and a mixer bag with adjustable shoulder straps for hands-free transport. With separate bags for the mixer and the two speakers—packing up after a performance is quick and efficient. The carry bags ensure your PA system remains in peak operating condition, gig after gig.
With its compact, portable design and 800W of power, the Harbinger M200-BT PA is ideal for small club shows, practice spaces, classrooms and events. Featuring four mic/line channels, Bluetooth streaming and protective carry bags, the M200-BT provides full-featured functionality for musicians, presenters and educators on the go.
MORE»| List | $379.99 |
The Harbinger S12 powered subwoofer delivers 1,000W amplification with a 12" driver and powerful DSP, all in a compact package that's ready for the stage. This sub delivers outstanding clarity and impact even when pushed to the limit. For ease of use, set the crossover frequency either by the size of the full-range speakers the S12 is pairing with, or select directly by hertz. There’s even a time-align delay feature that avoids phase alignment issues for maximum low frequency response. And with 130dB max SPL output, Guitar Center recommends the S12 to deliver clean, deep bass in a variety of situations.
Live sound PA systems require a lot of power to create clean, tight bass at high volumes. That’s why the Harbinger S12 active subwoofer packs a Class-D amplifier with 1,000W peak output. The high headroom and low distortion provide outstanding clarity and impact. This sub is designed to perfectly complement any of the VARI series full-range speakers, Harbinger PA systems or powered speakers and PA systems from other quality manufacturers. It's a convenient way to round out an existing system with high-impact bass. It's also a great anchor for building a compact live setup.
The Harbinger S12 powered sub includes sophisticated DSP that guarantees ideal sound, with easy-to-use controls. The rear panel has concise directions for integrating the sub into a complete PA system. It explains how to set the crossover frequency to match the size of any full-range speaker, or manually set a preferred frequency in hertz. Once the crossover is set, the phase switch and time-align delay knob ensure ideal low frequency response.
Big bass usually means heavyweight systems that can be a challenge for DJs and live bands. They're difficult to move, and they don't always fit on compact stages. The S12 addresses that problem. It's only about half the weight of a typical 18" sub, yet it delivers lows down to 35Hz and a full 130db max SPL. A single S12 works well with a pair of 8" or 10" powered speakers for big sound from a small system. It's also a good complement to 12" or 15" speakers, for banquet room DJs or bands playing small venues. Use two S12s with a pair of 12" or 15" speakers for high-volume live bands or larger DJ gigs. Want more bass from a portable line array or PA system? The S12 can also help with that, adding deep bass while keeping the overall setup nice and portable.
With dual XLR combo connections, the S12 accepts both balanced and unbalanced XLR inputs as well as 1/4" jacks. This makes it easy to connect the subwoofer with a set of Harbinger VARI series or other powered speakers. Set the crossover frequency, phase switch and time-align delay to perfectly match the sub with the speakers for a well-balanced setup. The output level control also allows users to dial in the ideal amount of bass without affecting output to the connected mains.
| List | $449.99 |
These convenient PA packages make it easy to get started quickly and sound your best. We’ve done all the work for you and hand-selected the components for optimum performance. No matter which package you choose, you can count on high-end technology, reliable components and premium audio.
Built to last and built to blast, this 10" powered PA speaker works great as front-of-house mains on smaller gigs, or as onstage monitors. Either way, KPX10A delivers full, rich and detailed sound, and is designed to meet the demands of today’s performing musicians and DJs.
Easy to Use
The built-in equalization and internal power amplifier on the KPX10A take the guesswork out of setting up your PA. Just connect the outputs of an audio mixer to the XLR or 1/4" input of the KPX10A speaker, adjust the volume to a desired level and you’re up and running.
Great Sound
The KPX10A features extended low frequency response, an intelligible midrange and pristine highs. The internal EQ curve is tailored for musical reproduction so house music and instruments shine while vocals sit perfectly in your mix. A special crossover maintains clear separation of frequencies for crisp, detailed sound reproduction. The KPX10A is equipped with a neodymium compression driver giving high frequencies the extra clarity needed when playing at high volumes.
Built Like a Tank
Kustom designs, tests and manufactures the KPX10A for long-term reliability. The gigging musician and DJ can rely on the tour-tested mechanical design to withstand life on the road. Every time an artist or performer takes the stage, they can trust Kustom won’t let them down. For added convenience, the KPX10A comes equipped with an ergonomically designed handle, rugged steel grille, 30° and 90°monitor angles, 1-3/8" pole mount, volume control, XLR and 1/4" inputs and 1/4" line level output.
| List | $329.99 |
This Harbinger LP9800 powered mixer package also contains two Kustom KPX10 10" passive speakers, stands and cables. The Harbinger LP9800 14-channel powered mixer provides the power and flexibility for gigging, rehearsing or jamming. With 800 watts of clean, articulate power, you can now drive stereo setups or split out for mains and monitors. Flip a switch and it transforms into a powerful mono bridge amp. The nine XLR mic inputs and 14 total line inputs allow you to use the LP9800 to mix and manage the sound for an entire band. Extra features include a performance-ready collection of 24-bit digital FX with customizable parameters, as well as rumble filters, –25dB pad and dual 9-band graphic EQs with LED lights to indicate your settings, easy to see in a dark club. Line outputs allow connections to powered speakers, making the LP9800 ready for any performance situation. Plus, its rugged construction and reliability means you can depend on it year after year.
MORE»| List | $849.99 |
These convenient PA packages make it easy to get started quickly and sound your best. We’ve done all the work for you and hand-selected the components for optimum performance. No matter which package you choose, you can count on high-end technology, reliable components and premium audio.
This rugged, molded PA speaker works great as a front-of-house main, as well as an onstage monitor. The KPX12A is tuned and voiced by the best ears in the industry to meet the demands of today’s performing musicians and DJs. This workhorse speaker proves you don’t have to drop a lot of cash to get great sound on stage.
Easy to Use
The built-in equalization and internal power amplifier on the KPX12A take the guesswork out of setting up your PA. Just connect the outputs of an audio mixer to the XLR or 1/4" input of the speaker, adjust the volume to a desired level and you’re up and running.
Great Sound
The KPX12A features extended low-frequency response, an intelligible midrange and pristine highs. The internal EQ curve is tailored for musical reproduction so house music and instruments shine while vocals sit perfectly in your mix. A special crossover maintains clear separation of frequencies for crisp, detailed sound reproduction. The KPX12A is equipped with a neodymium compression driver giving high frequencies the extra clarity needed when playing at high volumes.
Built Like a Tank
Kustom designs, tests and manufactures its amplifiers, enclosures and transducers for long-term reliability. The gigging musician and DJ can rely on the tour-tested mechanical design to withstand life on the road. Every time an artist or performer takes the stage, they can trust Kustom won’t let them down.
The KPX12A powered speaker is equipped with an ergonomically designed handle, rugged steel grille, 30° and 90° monitor angles, 1-3/8" pole mount, volume control, XLR and 1/4" inputs and 1/4" line level output.
| List | $449.99 |
This Kustom KPX package comes with your choice of a pair of 12" or 15" KPX Series powered speakers, speaker stands and tote bags.
Whether you choose the 12" or the 15" pair, the Kustom KPX Series passive monitor cabinet packs a lot of value into an affordable package, making it a great option for working musicians. This full-range cabinet offers fantastic audio quality. A specially voiced crossover maintains clear separation of frequencies for crisp detailed sound reproduction. The cabinet's woofer delivers punchy low frequencies, while the horn reproduces all the clear high tones. The speaker is equipped with two parallel input/output jacks which allow additional passive cabinets to be connected (note: do not connect to powered speaker cabinets). The KPX series has been designed to withstand years of active duty with sturdy metal grilles, stout handles and a high-quality, heavy-duty finish. The cabs also offer 30-, 60-, and 90-degree positioning, along with a 1-3/8" pole mount insert.
| List | $699.99 |
When it comes to wireless, Shure has long been at the forefront, developing reliable, transparent systems that deliver stellar performance at prices musicians love. The Shure GLXD14+/93-Z3 builds on the success of its counterpart in the GLXD series, adding new Dual Band capacity, with more than double the available bandwidth. This makes it easier to find a clear channel, even when your band or venue is running multiple units. Simple, worry-free setup and management gets the curtain up on time. Smart, flexible charging options and a high-capacity lithium-ion battery give you from 12–17 hours of performance time (depending on band), so the show can run long. But, let’s look a little closer at what makes up this flexible wireless system.
Shure Dual Band Technology
Key to the Shure GLXD+ series is Shure’s Dual Band Wireless System. By expanding the available frequency range from just the 2.4GHz band to encompass the 5.8GHz band as well, the total bandwidth is increased almost 250%. With all this extra bandwidth, the Shure GLXD+ wireless systems can easily find available channels to work in—especially in the less-crowded, more lightly used 5.8GHz band. So, running multiple units is much less complicated. Add in Shure’s smart pairing and smart frequency management, and you’re up and running quickly with no fuss. The system will even automatically choose backup frequencies and seamlessly switch to them if interference crops up in the middle of the show.
The Shure GLXD+ Bodypack
The GLXD14+/93-Z3 system is based around Shure’s versatile WL93 lavalier mic. The body pack transmitter—common for the guitar, lavalier and headset configurations—is equipped with a mini-XLR input for easy connections. The high-capacity, rechargeable lithium-ion battery features a flexible smart system that can charge from a variety of sources and includes quick-charge capability. With 12–17 hours of runtime per charge—depending on which band the system is using—you’re ready for a production of Wagner’s Ring Cycle, a day-long seminar, or an extended jam band improvisational set.
The GLXD4+ Desktop Receiver
The Shure GLXD14+/93-Z3 system includes the GLXD4+ Dual Band tabletop receiver for superb digital audio clarity. Combined with Shure’s automatic frequency management and the power of Dual Band Technology, this compact, dual-antenna receiver conveniently displays connection information, battery level and more. The built-in charging bay for your transmitter’s battery can provide three hours of operating time on just a 30-minute charge, so it’s easy to keep things topped off and ready to rock.
Combining the clarity of digital audio, the flexibility of Dual Band technology, smart frequency management and Shure’s legendary microphones, a GLXD14+/93-Z3 wireless system is a no-brainer, whether you’re setting up your own pedalboard or taking the whole band wireless. Click to buy one here, or visit your local Guitar Center store to get hands-on.
| List | $579.00 |
This exciting Simmons amp, sub, speaker stand and cable bundle works with all electronic drum sets. It has everything you need to connect the included DA2110 speakers and mount your DA2110 sub on stands. Just add an instrument cable, and you're ready to play with your favorite electronic drum set (instrument cable sold separately).
Simmons DA2110 Advanced Drum Amps
The Simmons DA2110 is a powerful and versatile practice drum amplifier that combines high-fidelity sound, ample power, stereo line inputs, AUX input and Bluetooth audio input. The result is a rig that provides studio monitor-style sound quality for your drums and tracks, with full control of your tone via a 2-knob EQ.
Its Smart Stereo feature allows the use of two DA2110 amplifiers, immersing the player in full-surround stereo, placing each element of the drum kit in its proper place in the stereo field. The first amplifier in this setup controls the volume and tone for the full rig, making it easy to dial in the perfect sound and make global adjustments on the fly.
Place the DA2110's versatile cabinet on the floor like a traditional amp, or take advantage of the pole mount to bring the sound to ear level. A floor/pole switch ensures consistent frequency response in either configuration.
The DA2110 includes a convenient mobile device holder, so you can practice or play along with your favorite tracks anywhere, plus its headphone output makes silent practice a breeze.
Simmons DA12S 12" Compact Stage Subwoofer
The Simmons DA12S compact stage subwoofer adds high-impact low end to any electronic drum amplification setup, letting you hear and feel the kick, toms and other elements of your kit like never before. High headroom, low distortion and a transparent, dynamic DSP limiter provide outstanding clarity and impact—even when pushed to the max.
The DA12S includes a Time-Align Delay adjustment feature that lets you dial in the ideal alignment with your full-range speakers, resulting in maximum fidelity and low-end impact. The convenient Crossover Frequency circuit allows selection of crossover frequency based on either speaker size, or a specific frequency you choose. And with 130dB max SPL output, the DA12S delivers enough clean, deep bass to keep up with the most powerful full-range amps or speakers—whether you're in a high-volume practice session or performing on stage. Plus, the top pole socket makes it easy to mount a full-range speaker on top using a standard speaker pole.
Proline Lightweight Adjustable Speaker Stands With Carrying Bag
The Proline SPS301 Speaker Stand is designed for performers, DJs, schools and other venues that utilize portable PA systems. It's ideal for speakers up to 60 lb., providing an abundance of security and convenience features in a lightweight, easy-to-transport design. The SPS301 adjusts from 31.5" to 45.7" for optimal speaker placement, with a wide leg spread that mitigates accidental tip over. A friction-locking height adjustment defends against shaft slippage, while a backup shaft-ring locking mechanism ensures complete placement safety. Its robust steel bolt, washer and nut keep the SPS301 stable even under maximum load and handling. And its collapsible legs and shaft, plus the convenient carry bag, make transporting and storing the SPS301 quick and easy.
Livewire Essential XLR 15' Microphone Cable
This 15' microphone cable comes with nickel-plated Rean connecters and 24-gauge dual conductor design. It also has spiral copper shielding (95% coverage) with strain relief, and a heavy PVC jacket.
| List | $999.99 |
Core 121 12" Subwoofer & column with Analog mixer The new CORE system from Studiomaster uses a specially designed curved array to provide a controlled and highly effective sound diffusion. Combining the curved array with a powerful bass reflex subwoofer giving up to 2800W of low end power, the whole system can provide 4400W peak (1100W RMS) in a compact, portable system that will give you the reach and sonic quality expected of an ultra compact array system. To complete the system, the CORE comes with a built-in 4 channel mixer, with DSP control and Bluetooth® connectivity. The CORE system is designed to be simple to set-up and use. The air-suspension adjustable speaker pole includes internal wiring, so just lift and place the lightweight curve array on top of the pole. Connect your power and you are good to go! Truly an ALL-IN-ONE system. Perfect for any performance. MORE»
| List | $1,699.00 |
Core 151 15" Subwoofer & column with Analog mixer The new CORE system from Studiomaster uses a specially designed curved array to provide a controlled and highly effective sound diffusion. Combining the curved array with a powerful bass reflex subwoofer giving up to 2800W of low-end power, the whole system can provide 4400W peak (1100W RMS) in a compact, portable system that will give you the reach and sonic quality expected of an ultra-compact array system. To complete the system, the CORE comes with a built-in 4-channel mixer, with DSP control and Bluetooth® connectivity. The CORE system is designed to be simple to set up and use. The air-suspension adjustable speaker pole includes internal wiring, so just lift and place the lightweight curve array on top of the pole. Connect your power and you are good to go! Truly an ALL-IN-ONE system. Perfect for any performance. MORE»
| List | $1,999.00 |
The self-powered all-in-one solution is an ultra-compact, powerful vertical array system for versatile use. DIRECT includes 6 x 3″ mid-frequency transducers for perfect clarity of instruments and voice. The 1″ high precision driver delivers dynamic and clear highs. The subwoofer is featured by one professional 12″ transducer for well-defined lows. The onboard 4-channel mixer enables a wide range of applications. Connecting microphones, instruments, players, or even wireless Bluetooth streaming sources: DIRECT is ready for it. The built-in DSP with its graphic display upgrades your sound to high definition audio quality. MORE»
| List | $1,245.00 |
150 watt PORTABLE PA with MP3 Player 150 watt Class D amplification MP3 media player with USB Bluetooth connectivity Ultra-low noise 3-channel mixer 2 mic/line channels + 1 line channel 3 band EQ Built-in effects Mic stand mounting system MORE»
| List | $419.00 |
