SHADOW-112CT 12" & 1" coax all-weather, short throw, 90 degree conical, transformer coupled The Shadow 112CT. Ideal in both indoor and outdoor venues because of its IP55 weather-resistant rating. Both 8 Ohm 600 watt recommended amplifier at 8 Ohms. 300 W continuous and 100 Volt line inputs via multicore cable. 100/200Watt 100V tappings. 12" Coaxial driver with 1" HF. 90 Degree conical dispersion. Stainless steel U bracket supplied. MORE»
| List | $1,805.00 |
2-way Active Line Array Column - 4x6 + 1.4 - 900Wrms, 133dB The Vertus CLA 406.2A comprises four custom 6.5" inch woofers with 1.5" voice coils and a 1.4-inch large format Neodymium compression driver with a 2.5-inch voice coil with a 100 H x 25 H degree dispersion. The built-in amp module delivers 600W for the LF section and 300W for HF for 133dB SPL Designed to be used with the CLA 118SA. FBT Vertus CLA 406.2A 2-way Active Line Array Column, the increased demand for an easy to set-up, sonically superior portable sound reinforcement system has prompted FBT to introduce a new version of the renowned VERTUS CLA460A active column array. The launch of the new VERTUS columns follows a steep rise in the use of the VERTUS CLA406A for mobile sound reinforcement applications and installation a trend spurred on by the columns depth of versatility and audio performance. Now making life easier for those on the road, both the CLA406.2A and more compact CLA206A have been designed with portability in mind, from the rugged hardware to new accessories which make set-up both extremely quick and highly intuitive. Bi-amplified 2-way line array 4 x 165mm (6.5 inches) custom woofers with 38mm (1.5 inches) coil Neodymium B&C compression HF driver with 36mm (1.4 inch) throat and 64mm (2.5 inch) coil Large format FBT waveguide with 100 degrees H x 25 degrees V dispersion Frequency response from 65Hz to 20KHz Class-D 600Wrms for LF and 300Wrms for HF amplifiers with switch mode power supply DSP processor with 8 equalization presets Control panel with XLR input and link, volume, presets, filter-HP, ground-lift Neutrik PowerCON IN and LINK power connectors Cabinet in 12mm (0.5 inches) birch plywood with scratch-resistant varnish, two side handles, rubber inserts for protection, and upper and lower anti-slip 4 lateral inserts, two upper and two lower points designed to accept quick release pins or M10 screws, and two rear M6 suspension points. New hardware for flying installations, for ground setups, and the possibility of coupling two or more CLA 406.2A / CLA 206A with an angle of 0 degree-20 degree in 5-degree steps vertically, all with optional quick release pins for touring. Topside inclined by 10 degrees to have maximum flexibility of use in combination with other CLA 406.2A or CLA 206A in order to adapt the vertical dispersion angle of the system to the listening area. The system can be used both in point source systems with the CLA 118SA sub and in vertical clusters, with the CLA 206A down-fill. MORE»
| List | $4,015.00 |
AC-U-110H Wall metal stand to mount ARCHON 110 in horizontal MORE»
AC-U-110V Wall metal Stand to mount ARCHON 110 in vertical MORE»
AC-U-112H Wall metal stand to mount ARCHON 112 in horizontal MORE»
AC-U-112V Wall metal Stand to mount ARCHON 112 in vertical MORE»
AC-U-115H Wall metal stand to mount ARCHON 115 in horizontal MORE»
AC-U-115V Wall metal stand to mount ARCHON 115 in Vertical MORE»
AJ-5 MS 30BK Adapter for fixing purposes J 5 MORE»
| List | $20.60 |
ARCHON-105 2-way Passive speaker - 5" + 1" - 200Wrms 8 OHM - 115DB SPL The Archon 105 is a 5" and a soft domed full-range passive speaker designed to provide ample bandwidth and high SPL for accurate sound reproduction in the installed sound market, perfect for modern indoor spaces. 1 x 5 (1.25 VC) custom made LF woofer with rubber surround 1 x 1 HF dome tweeter 2-way, passive sound reinforcement systems 12mm (0.47) baltic birch plywood cabinets Custom designed LF woofers, made in Italy Custom designed HF dome tweeter, Made in Italy Crossover networks equipped with 4 x Euroblock speaker terminals; factory preset for optimal line transformer installation Multiple M5 threaded rigging points Acoustically transparent steel grille and antidust protection cloth New FBT rotatable logo badge following vertical or horizontal installation Optional mounting hardware Optional line transformer 50W MORE»
ARCHON-106 2-way Passive speaker - 6" + 1" - 300Wrms 8 OHM - 119dB SPL The Archon 106 is a 6.5" and 1" domed full-range passive speaker designed to provide ample bandwidth and high SPL for accurate sound reproduction in the installed sound market perfect for modern indoor spaces. 1 x 6.5 (1.5) custom-made LF woofer with rubber surround. 1 x 1 HF dome tweeter. 6 x M5 threaded rigging points. 2-way, passive sound reinforcement systems. 12mm (0.47) baltic birch plywood cabinets. Custom-designed LF woofers, made in Italy. Custom-designed HF dome tweeter, Made in Italy. Crossover networks equipped with 4 x Euroblock speaker terminals; factory preset for optimal line transformer installation. Multiple M5 threaded rigging points. Acoustically transparent steel grille and antidust protection cloth. New FBT rotatable logo badge following vertical or horizontal installation. Optional mounting hardware. Optional line transformer 100W MORE»
ARCHON-108 2-way Passive speaker - 8" + 1,5" - 350Wrms 8 OHM - 121DB SPL The Archon 108 is an 8" and 1" domed full-range passive speaker designed to provide ample bandwidth and high SPL for accurate sound reproduction in the installed sound market perfect for modern indoor spaces. 1 x 8 (1.5 VC) custom-made LF woofer with rubber surround. 1 x 1.5 HF high-end dome tweeter. 8 x M5 threaded rigging points. 2-way, passive sound reinforcement systems. 12mm (0.47) baltic birch plywood cabinets. Custom-designed LF woofers, made in Italy. Custom-designed HF dome tweeter, Made in Italy. Crossover networks equipped with 4 x Euroblock speaker terminals; factory preset for optimal line transformer installation. Multiple M5 threaded rigging points. Acoustically transparent steel grille and antidust protection cloth. New FBT rotatable logo badge following vertical or horizontal installation. Optional mounting hardware. Optional line transformer 100W. MORE»
ARCHON-110 2-way Passive speaker - 10" + 1" - 1" 80°x 50° rot. Horn - 700Wrms / 8 ohm 129dB SPL The Archon 110 is B&C loaded 10" woofer and 1" Compression driver, Bi-ampable full-range passive speaker designed to provide ample bandwidth and high SPL for accurate sound reproduction in the installed sound market perfect for modern indoor spaces. MORE»
2-way Passive speaker - 12" + 1,4" - 1,4" 70°x 50° rot. Horn - 1000Wrms. 8ohm /133DB SPL The Archon 112 has B&C loaded 12" woofer and 1.4" Compression driver, Bi-ampable full-range passive speaker designed to provide ample bandwidth and high SPL for accurate sound reproduction in the installed sound market perfect for modern indoor spaces. Stylish architectural cabinet design Acoustically transparent steel grilles with protection cloth High SPL, fast responding dynamics, excellent intelligibility, wideband, extremely low distortion Baltic birch plywood cabinets available in black or white extra texture paint Choice of different RAL paint colors on order Choice of different paint finish: glossy, matt, textured, and more, on order Custom designed low-frequency woofers, made in Italy Custom designed high-frequency compression drivers, made in Italy Rotatable horns for optimal horizontal or vertical sound dispersion angle Selectable bi-amp/full range crossover network Full suspension possibilities through multiple M10 / M5 threaded rigging points and a wide range of mounting hardware Possibility to install line transformers for 100V/70V applications Possibility to order weatherproof versions for outdoor use Possibility to extend low frequencies performance through dedicated and compact subwoofers (Archon 208S, Archon 215S) MORE»
ARCHON-115 2-way Passive speaker - 15" + 2" - 2" 60°x 40° rot. Horn - 1000Wrms. 8ohm /134dB SPL The Archon 115 is B&C loaded 15" woofer and 2" Compression driver, Bi-ampable full-range passive speaker designed to provide ample bandwidth and high SPL for accurate sound reproduction in the installed sound market perfect for modern indoor spaces. Stylish architectural cabinet design Acoustically transparent steel grilles with protection cloth High SPL, fast responding dynamics, excellent intelligibility, wide band, extremely low distortion Baltic birch plywood cabinets available in black or white extra texture paint Choice of different RAL paint colors on order Choice of different paint finish: glossy, matt, textured, and more, on order Custom designed low-frequency woofers, made in Italy Custom designed high-frequency compression drivers, made in Italy Rotatable horns for optimal horizontal or vertical sound dispersion angle Selectable bi-amp/full range crossover network Full suspension possibilities through multiple M10 / M5 threaded rigging points and a wide range of mounting hardware Possibility to install line transformers for 100V/70V applications Possibility to order weatherproof versions for outdoor use Possibility to extend low frequencies performance through dedicated and compact subwoofers (Archon 208S, Archon 215S) MORE»
ARCHON-208S Bass reflex Compact Passive Subwoofer - 2x8" - 600Wrms The Archon 208S provides the solution of bass reinforcement in the sound-installed market with a small compact design twin 8" loaded Italian-made discrete cabinet. Can be wall-mounted using an optional AC-W208 bracket. Stylish architectural cabinet design Acoustically transparent steel grilles with protection cloth High SPL, fast responding dynamics, excellent intelligibility, wideband, extremely low distortion Baltic birch plywood cabinets available in black or white extra texture paint Choice of different RAL paint colors on order Choice of different paint finish: glossy, matt, textured, and more, on order Custom designed low-frequency woofers, made in Italy Custom designed high-frequency compression drivers, made in Italy Rotatable horns for optimal horizontal or vertical sound dispersion angle Selectable bi-amp/full range crossover network Full suspension possibilities through multiple M10 / M5 threaded rigging points and a wide range of mounting hardware Possibility to install line transformers for 100V/70V applications Possibility to order weatherproof versions for outdoor use Possibility to extend low frequencies performance through dedicated and compact subwoofers (Archon 208S, Archon 215S) MORE»
ARCHON-215S Bass reflex Compact Passive Subwoofer - 2x15" - 2000Wrms 4ohm 142dB SPL 2 x 15 (4 VC) custom made high excursion woofer with bass-reflex enclosure 18mm (3/4) birch plywood enclosure Four FBT design aluminum handles 2x Speakon NL-4 connectors MORE»
VHA118SND Processed Bass reflex Active Subwoofer - 1x18" - 2500Wrms- Dante and Infinito The design of the VHA118SND has produced a unique low-end module that is capable of generating extremely high levels of SPL for prolonged periods. Using BEM finite element simulations, FBT has optimized the woofers load volume, while the careful study of the grille and the assemblys protective fabric has minimized acoustic impedance for a net improvement in performance, compared to previous models. The VHA118SND extends the overall system frequency response to 30Hz while supporting fully ground-stacked configurations, courtesy of a special integrated mounting hardware. MORE»
BOX-127 Horizontal wall bracket for JMaxX 110 and PROMaxX 110 MORE»
| List | $154.50 |
BOX-128 Horizontal wall bracket for JMaxX 112/114 & PROMaxx 112/114 MORE»
| List | $154.50 |
CLA-118-SA 18" Active Bass reflex subwoofer - 900Wrms 138 dB SPL The Vertus CLA 118SA is specifically designed to work with the 206 and 406 Vertus Column Line Array series. This Active 18 B&C high excursion woofer with a 3 voice coil is driven by the built-in 1200W RMS amplifier delivering 138 dB SPL. This great combination is in a 15mm Baltic birch plywood cabinet completely made in Italy. The CLA 118SA is a subwoofer in birch plywood with an 18" woofer from B&C in a bass reflex port with an extensive laminar airflow, minimizing turbulence and power compression. The Class-D, switching power amplifier module is constructed in die-cast aluminum with natural convection and is rated at 1200W. Onboard DSP also offers functions such as filtering, equalization, and protection. When you need to extend the performance of the CLA406A, especially in live applications, the CLA118SA acts as a support and base for the CLA406A column that can be applied, via optional hardware, with M20 points positioned on the top of the sub. The CLA118Sa is also modular and can be stacked thanks to special milling, increasing the SPL and raising the base of CLA406A. 18 B&C high excursion woofer with 3 voice coil Frequency response from 33Hz to 100Hz 1200W RMS Class D power amplifier with switching mode power supply DSP Processor with 8 presets, cardioid configuration, delay Control Panel with XLR input and link, volume, presets, delay, phase 0 ° -180 °, ground-lift Neutrik powerCON True1 power IN and LINK connectors 15mm (5/8) birch plywood with scratch-resistant coating Stackable M20 (20mm) top mount speaker stand socket, two diecast aluminum carrying handles with rubber inserts Optional 4 swivel-mount casters 80mm (3.15) on request Suitable for low-frequency extension and reinforcement of the CLA406A array, especially for live performance. MORE»
| List | $3,865.00 |
CLA-206A 2-way Active Line Array Column - 2x6.5LF + 1x1.4HF - 600Wrms+300Wrms Stand-alone or as a part of the CLA 604.2A system, the CLA 206A 2 x 6.5" + 1 x 1.4" active cabinet excels for both SPL and audio articulation. Now making life easier for those on the road, both the CLA406.2A and more compact CLA206A have been designed with portability in mind, from the rugged hardware to new accessories which make set-up both extremely quick and highly intuitive. Bi-amplified 2-way line array 2 x 165mm (6.5 inches) custom woofers with 38mm (1.5 inch) coil Neodymium B&C compression HF driver with 36mm (1.4 inch) throat and 64mm (2.5 inch) coil Large format FBT waveguide with 100 H x 25 degrees V dispersion Frequency response from 65Hz to 20KHz Class-D 600Wrms for LF and 300Wrms for HF amplifiers with switching mode power supply DSP processor with 8 equalization presets Control panel with XLR input and link, volume, presets, filter-HP, ground-lift Neutrik PowerCON IN and LINK power connectors Cabinet in 12mm (0.5 inches) birch plywood with scratch-resistant varnish, two side handles, rubber inserts for protection, and anti-slip upper and lower 4 lateral inserts, two upper and two lower points designed to accept quick release pins or M10 screws. New hardware for flying installations, for ground setups, and the possibility of coupling two or more CLA 406A / CLA 206A with an angle of 0 - 20 degrees in 5-degree steps vertically, all with optional quick release pins for touring. The topside is inclined 20 degrees to have maximum flexibility of use in combination with other CLA 206A or CLA 406A in order to adapt the vertical dispersion angle of the system to the listening area. The system can be used both in small point source systems with the CLA 118SA sub and in clusters of two to have a dispersion of 40 degrees (V). It can also be considered a down-fill for CLA 406A systems. MORE»
| List | $2,780.00 |
CLA-208-SA Active Bass reflex subwoofer - 2x8 - 600Wrms The Vertus CLA 208SA is a 2 x 8" active subwoofer bass-reflex design featuring a birch ply enclosure. The internal Class D amplifier delivers 600W 129dB SPL ideal for extending the CLA604A's low-frequency performance in live applications. The CLA208SA subwoofers are modular as well, and they can be stacked to enlarge and increase the maximum SPL. Black finish CLA 208SA is a 2 x 8" active subwoofer in bass-reflex design and birch ply enclosure. The internal Class D amplifier delivers 600W and is matched with a switch mode power supply and a DSP processor with filtering functions, equalization and speaker protection. Created with the idea of extending the CLA608A's low frequency performance in live applications, the CLA208SA serves as the base support for the CLA604A column speaker which can either be frontally mounted to the sub, as well as fixed upon the optional stand through the M20 socket on the upside of the sub. The CLA208SA subwoofers are modular as well, and they can be stacked to enlarge and increase the maximum SPL. CLA system features: High-level sound quality from 50Hz to 20kHz expressly developed for live performance Long-distance sound projection and better SPL distribution toward the audience Great and dynamic power performance thanks to the tri-amplification system Lightweight and easy to carry Design and elegance for easy integration even in the most demanding installations Very compact dimensions enable the listener to concentrate on sound and not on speakers! High horizontal dispersion The internal XLR signal link system and Neutrik Powercon power supply on both the sub and the satellite, allow for hiding wires and cables from open sight, preserving the system's clean aesthetics. MORE»
| List | $1,905.00 |
CLA-208-SA-W Active Bass reflex subwoofer - 2x8 - 600Wrms (White). The Vertus CLA 208SAW is a 2 x 8" active subwoofer bass-reflex design featuring a birch ply enclosure. The internal Class D amplifier delivers 600W 129dB SPL ideal for extending the CLA604A's low-frequency performance in live applications. The CLA208SA subwoofers are modular as well, and they can be stacked to enlarge and increase the maximum SPL. White Finish CLA 208SAW is a 2 x 8" active subwoofer in bass-reflex design and birch ply enclosure. The internal Class D amplifier delivers 600W and is matched with a switch-mode power supply and a DSP processor with filtering functions, equalization, and speaker protection. Created with the idea of extending the CLA608A's low-frequency performance in live applications, the CLA208SAW serves as the base support for the CLA604A column speaker which can either be frontally mounted to the sub, as well as fixed upon the optional stand through the M20 socket on the upside of the sub. The CLA208SAW subwoofers are modular as well, and they can be stacked to enlarge and increase the maximum SPL. CLA system features: High-level sound quality from 50Hz to 20kHz expressly developed for live performance Long-distance sound projection and better SPL distribution toward the audience Great and dynamic power performance thanks to the tri-amplification system Lightweight and easy to carry Design and elegance for easy integration even in the most demanding installations Very compact dimensions enable the listener to concentrate on sound and not on speakers! High horizontal dispersion The internal XLR signal link system and Neutrik Powercon power supply on both the sub and the satellite, allow for hiding wires and cables from open sight, preserving the system's clean aesthetics. MORE»
| List | $1,905.00 |
CLA-403-TB Passive Line Array Column - 4x3 - 120Wrms - 110°H x 25°V/50°V - IP 55 - EN54-24 - Black Bringing new coverage options to the installed sound market, the new VERTUS CLA (Column Line Array) range boasts EN54-24 certification and IP55 rating together with user switchable vertical dispersion characteristics. Suited for both indoor and outdoor use, the CLA 403 has four 3" full-range woofers and is contained in a lightweight and durable, powder-coated aluminum housing. Completely dustproof and waterproof, the enclosure grille is covered with a special hydrophobic fabric to ensure absolute rejection of all atmospheric agents. Full EN54-24 certification also means both columns can be used for emergency and evacuation applications in the event of a fire, all VERTUS CLA columns are equipped with a ceramic terminal block and thermal fuse. Passive column array 4 x 3 full-range custom woofers with 0.7 voice-coils Frequency response from 140Hz to 20KHz Vertical dispersion angle selector: 110° H x 25° V (NARROW), 110° H x 50° V (WIDE) Ceramic screw-in connector with thermal fuse 100V / 60W line transformer with power selector (excludable) Extruded aluminum cabinet with powder coating Grille with hydrophobic fabric The wide availability of accessories for installation Multiple CLA 803 and CLA 403 columns can be linked to increased SPL and coverage IP55 rating means suitable for outdoor installation EN54-24 certification means suitable for emergency and evacuation systems Ideal for fixed installations in reverberant environments that require heightened intelligibility of both music and voice MORE»
| List | $669.50 |
CLA-403-TW Passive Line Array Column - 4x3 - 120Wrms - 110°H x 25°V/50°V - IP 55 - EN54-24 - White Bringing new coverage options to the installed sound market, the new VERTUS CLA (Column Line Array) range boasts EN54-24 certification and IP55 rating together with user switchable vertical dispersion characteristics. Suited for both indoor and outdoor use, the CLA 403 has four 3" full-range woofers and is contained in a lightweight and durable, powder-coated aluminum housing. Completely dustproof and waterproof, the enclosure grille is covered with a special hydrophobic fabric to ensure absolute rejection of all atmospheric agents. Full EN54-24 certification also means both columns can be used for emergency and evacuation applications in the event of a fire, all VERTUS CLA columns are equipped with a ceramic terminal block and thermal fuse. Passive column array 4 x 3 full-range custom woofers with 0.7 voice-coils Frequency response from 140Hz to 20KHz Vertical dispersion angle selector: 110° H x 25° V (NARROW), 110° H x 50° V (WIDE) Ceramic screw-in connector with thermal fuse 100V / 60W line transformer with power selector (excludable) Extruded aluminum cabinet with powder coating Grille with hydrophobic fabric The wide availability of accessories for installation Multiple CLA 803 and CLA 403 columns can be linked to increased SPL and coverage IP55 rating means suitable for outdoor installation EN54-24 certification means suitable for emergency and evacuation systems Ideal for fixed installations in reverberant environments that require heightened intelligibility of both music and voice MORE»
| List | $669.50 |
CLA-604-A 2-way Active Line Array Column - 6x4" - 400Wrms+100Wrms 125db SPL The Vertus CLA 604 Active Column Line Array has a 6 x 4 custom woofer with a 1 voice coil and 4 x 1 dome neodymium tweeter on a waveguide. The built-in amplifier delivers 400W + 100W RMS to achieve 125DB SPL Designed to work with the CLA 208SA Subs. Black Finish CLA604A is an extruded aluminum column speaker fitted with 6 x 4" custom woofers and 4 x 1" dome tweeters, each coupled to a waveguide. The internal Class D amplification, 400W for woofers and 100W for tweeters with switch mode power supply and DSP processor with 4 equalization presets provide unexpected dynamics in a system of these dimensions. The rapid latching system with pins allows for the expansion of the system, doubling-up CLA604A modules to form a unified column with an absolute and coherent source integration and increase of SPL and low-frequency directivity control. CLA system features: High-level sound quality from 50Hz to 20kHz expressly developed for live performance Long-distance sound projection and better SPL distribution toward the audience Great and dynamic power performance thanks to a tri-amplification system Lightweight and easy to carry Design and elegance for easy integration even in the most demanding installations Very compact dimensions enable the listener to concentrate on sound and not on speakers! High horizontal dispersion 2-Way Bi-Amped 6x 4" Neodymium woofer 4x 1" Neodymium tweeter with horn 400W Class D amplifier for the bass range 100W Class D amplifier for high frequencies Built-in switched-mode power supply DSP Processor with 4 equalizers presets Control panel with volume, presets, HP filter, mic/ line, status LED Aluminum housing (deep-drawn) Powder-coated surface Tripod or wall mountable Frequency range: 130 Hz - 20 kHz Max. SPL: 125 dB 100° x 20° XLR Signal and power twist for power input and output Dimensions: 130 x 841 x 130 mm Weight: 9 kg Color: Black or White MORE»
| List | $2,060.00 |
CLA-604-A-W 2-way Active Line Array Column - 6x4" White. 125db SPL The Vertus CLA 604 Active Column Line Array has a 6 x 4 custom woofer with a 1 voice coil and 4 x 1 dome neodymium tweeter on a waveguide. The built-in amplifier delivers 400W + 100W RMS to achieve 125DB SPL Designed to work with the CLA 208SA Subs. Black Finish CLA604A is an extruded aluminum column speaker fitted with 6 x 4" custom woofers and 4 x 1" dome tweeters, each coupled to a waveguide. The internal Class D amplification, 400W for woofers and 100W for tweeters with switch mode power supply and DSP processor with 4 equalization presets provide unexpected dynamics in a system of these dimensions. The rapid latching system with pins allows for the expansion of the system, doubling-up CLA604A modules to form a unified column with an absolute and coherent source integration and increase of SPL and low-frequency directivity control. CLA system features: High-level sound quality from 50Hz to 20kHz expressly developed for live performance Long-distance sound projection and better SPL distribution toward the audience Great and dynamic power performance thanks to a tri-amplification system Lightweight and easy to carry Design and elegance for easy integration even in the most demanding installations Very compact dimensions enable the listener to concentrate on sound and not on speakers! High horizontal dispersion 2-Way Bi-Amped 6x 4" Neodymium woofer 4x 1" Neodymium tweeter with horn 400W Class D amplifier for the bass range 100W Class D amplifier for high frequencies Built-in switched-mode power supply DSP Processor with 4 equalizers presets Control panel with volume, presets, HP filter, mic/ line, status LED Aluminum housing (deep-drawn) Powder-coated surface Tripod or wall mountable Frequency range: 130 Hz - 20 kHz Max. SPL: 125 dB 100° x 20° XLR Signal and power twist for power input and output Dimensions: 130 x 841 x 130 mm Weight: 9 kg Color: Black or White MORE»
| List | $2,060.00 |
CLA-604-W 2-way Passive Line array column - 6x4 + 4x1 - 500Wrms - 100°H x 20°V dispersion White RAL9016 The Vertus CLA 604 ActiveColumn Line Array has a 6 x 4 custom woofer with a 1 voice coil and 4 x 1 dome neodymium tweeter on a waveguide. The built-in amplifier delivers 400W + 100W RMS to achieve 125DB SPL Designed to work with the CLA 208SA Subs. High-level sound quality from 50Hz to 20kHz expressly developed for live performance Long-distance sound projection and better SPL distribution toward the audience Great and dynamic power performance thanks to the tri-amplification system Lightweight and easy to carry Design and elegance for easy integration even in the most demanding installations Very compact dimensions enable the listener to concentrate on sound and not on speakers! High horizontal dispersion 2-Way Bi-Amped 6x 4" Neodymium woofer 4x 1" Neodymium tweeter with horn 400W Class D amplifier for the bass range 100W Class D amplifier for high frequencies Built-in switched-mode power supply DSP Processor with 4 equalizers presets Control panel with volume, presets, HP filter, mic/ line, status LED Aluminum housing (deep-drawn) Powder-coated surface Tripod or wall mountable Frequency range: 130 Hz - 20 kHz Max. SPL: 125 dB 100° x 20° XLR Signal and power twist for power input and output Dimensions: 130 x 841 x 130 mm Weight: 9 kg Colour: White MORE»
| List | $1,545.00 |
CLA-803-TB Passive Line Array Column - 8x3 - 240Wrms - 110°H x 15°V/40°V - IP 55 - EN54-24 - Black Bringing new coverage options to the installed sound market, the new VERTUS CLA (Column Line Array) range boasts EN54-24 certification and an IP55 rating, the range has been created to add discreet but powerful sound reinforcement in even the most challenging of projects, including the ability to select dispersion angles depending on the requirements of the project. Suited for both indoor and outdoor use, the VERTUS CLA 803 has eight 3" full-range woofers and is contained in a sleek, lightweight and durable, powder-coated aluminum housing. Completely dustproof and waterproof, the enclosure grille is covered with a special hydrophobic fabric to ensure absolute rejection of all atmospheric agents. Full EN54-24 certification also means both columns can be used for emergency and evacuation applications in the event of a fire, all VERTUS CLA columns are equipped with a ceramic terminal block and thermal fuse. Passive column array 8 x 3 full-range custom woofers with 0.7 voice-coils Frequency response from 140Hz to 20KHz Vertical dispersion angle selector: 110° H x 15° V (NARROW), 110° H x 40° V (WIDE) Ceramic screw-in connector with thermal fuse 100V / 120W line transformer with power selector (excludable) Extruded aluminum cabinet with powder coating Grille with hydrophobic fabric Wide availability of accessories for installation Multiple CLA 803 and CLA 403 columns can be linked to increased SPL and coverage IP55 rating means suitable for outdoor installation EN54-24 certification means suitable for emergency and evacuation systems Ideal for fixed installations in reverberant environments that require heightened intelligibility of both music and voice MORE»
| List | $1,030.00 |
CLA-803-TW Passive Line Array Column - 8x3 - 240Wrms - 110°H x 15°V/40°V - IP 55 - EN54-24 - White Bringing new coverage options to the installed sound market, the new VERTUS CLA (Column Line Array) range boastsEN54-24 certification and an IP55 rating, the range has been created to add discreet but powerful sound reinforcement in even the most challenging of projects, including the ability to select dispersion angles depending on the requirements of the project. Suited for both indoor and outdoor use, the VERTUS CLA 803 has eight 3" full-range woofers and is contained in a sleek, lightweight and durable, powder-coated aluminum housing. Completely dustproof and waterproof, the enclosure grille is covered with a special hydrophobic fabric to ensure absolute rejection of all atmospheric agents. Full EN54-24 certification also means both columns can be used for emergency and evacuation applications in the event of a fire, all VERTUS CLA columns are equipped with a ceramic terminal block and thermal fuse. Passive column array 8 x 3 full-range custom woofers with 0.7 voice-coils Frequency response from 140Hz to 20KHz Vertical dispersion angle selector: 110° H x 15° V (NARROW), 110° H x 40° V (WIDE) Ceramic screw-in connector with thermal fuse 100V / 120W line transformer with power selector (excludable) Extruded aluminum cabinet with powder coating Grille with hydrophobic fabric Wide availability of accessories for installation Multiple CLA 803 and CLA 403 columns can be linked to increased SPL and coverage IP55 rating means suitable for outdoor installation EN54-24 certification means suitable for emergency and evacuation systems Ideal for fixed installations in reverberant environments that require heightened intelligibility of both music and voice MORE»
| List | $1,030.00 |
VHAC406X3 Cover for 3 VHA 406/112 on a trolley MORE»
| List | $260.00 |
Made from durable nylon, this soft-lined padded cover will protect the VENTIS 206 while on the road. MORE»
| List | $113.30 |
